PART NUMBER ATSK5E-1KUTP-CMXT-$168.88 UV Rated- ALUMINUM SHIELD CABLE/1000FT Direct Burial STP w/ PVC Tape Layer w/ Aluminum Foil Shielding layer

______________________________________

• CAT5e
• UTP (Unshielded Twisted Pair)
• 24AWG Solid Copper Core
• UV Stabilized PE Jacket
• 2nd PVC jacket layer inside cable for additional water proofing
• Gel Filled for Direct Burial Applications
• Ripcord
• Meets TIA/EIA 568B.2 Networking Standard
• Supports 10/100/1000Mbps
• Reel in a box

CAT 5E OUTDOOR AERIAL CABLE-

CAT 5E OUTDOOR AERIAL CABLE-OUTDOOR AERIAL-Part Number: ATSK5E-1KUTP-CMXFT - $ 189/1000 Feet- Call For Latest Pricing

CAT5E 350MHz, Cable, 24AWG, UTP, 4 Pairs, Solid, 1000', Outdoor Aerial/Duct Cable, Flooded Core, Direct Burial, FRPE Jacket, (CMX) Cable, Pull Box, Black

CAT 5e OSP Rated Direct Bury -AERIAL CABLE WITH MESSENGER - ALUMINUM SHIELD CABLE - THIS CABLE IS NOT GEL FILLED AND IS DESIGNED TO USE IN BUILDING TO BUILDING EXTENTION OF TELEPHONE AND DATA ASERVICESSUCH AS DSL-BROADBAND- ETHERNET- CAN ALSO BE USED FOR ENVIRONMENTS WITH emp- electromagnetic pulse radiation- OR 'NOISY' AREAS THAT CAN INTERFERE WITH DATA AND OR TELEPHONE TRANSMISSION.

OUTDOOR AERIAL-Part Number: ATSK5E-1KUTP-CMXFT CAT5E 350MHz, Cable AERIAL CABLE WITH MESSENGER - ALUMINUM SHIELD CABLE - THIS CABLE IS NOT GEL FILLED AND IS DESIGNED TO USE IN BUILDING TO BUILDING EXTENTION OF TELEPHONE AND DATA ASERVICESSUCH AS DSL-BROADBAND- ETHERNET- CAN ALSO BE USED FOR ENVIRONMENTS WITH emp- electromagnetic pulse radiation- OR 'NOISY' AREAS THAT CAN INTERFERE WITH DATA AND OR TELEPHONE TRANSMISSION.

DUCT CABLE: Part Number: ATSK5E-1KUTP-CMXFT CAT5E 350MHz, Cable, 24AWG, UTP, 4 Pairs, Solid, 1000', Outdoor Aerial/Duct Cable, Flooded Core, With Drain Wire, Direct Burial, FRPE Jacket, (CMX) Cable, Pull Box, Black

• 4-pair shielded twisted pair cable
• Easy to read Numbered Foot Marking On Outside Of Cable Jacket
• 24AWG solid bare copper conductor
• Pairs are wrapped in a mylar foil aluminum shield/wrap
• Meets or exceeds Cat5e specifications
• High-density polyethylene insulation, PVC jacket
• Foot-marked cable packaged in EZ pull box
• Ideal for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 100 Vg-AnyLAN(IEEE 802.12), Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155 and voice
• CM/CMR rated for use in walls and conduit in ceiling
• verified compliant with EIA/TIA standards by UL and ETL

CAT 5E SHIELDED Cable WITH MESSENGER-UV RATED

CAT 5E SHIELDED Cable WITH MESSENGER-UV RATED

Shielded CAT 5E OSP Rated Cable Part Number: ATSK5E-1KUTP-CMXT-UV Rated- ALUMINUM SHIELD CABLE - THIS CABLE IS NOT GEL FILLED AND IS DESIGNED TO USE IN BUILDING TO BUILDING EXTENTION OF TELEPHONE AND DATA ASERVICESSUCH AS DSL-BROADBAND- ETHERNET- CAN ALSO BE USED FOR ENVIRONMENTS WITH emp- electromagnetic pulse radiation- OR 'NOISY' AREAS THAT CAN INTERFERE WITH DATA AND OR TELEPHONE TRANSMISSION.

(3) CAT 5E SHIELDED DIRECT BURY Part Number: ATSK5E-1KUTP-CMXT

Suggested Price $ 199.00 /1000 feet- Call For Latest Pricing

Due to fluctuations in the cost of oil, copper and raw goods- please call first to get latest pricing on all copper cables

Mylar CAT 5e Aluminum Shielded Cable CAT5E 350MHz, Cable, 24AWG, UTP, 4 Pairs, Solid, 1000', Outdoor Aerial/Duct Cable, Mylar Foil & Water Proof Tape, FRPE Jacket, Direct Burial, (CMX) Cable, Pull Box, Black.

• 4-pair shielded twisted pair cable
• Easy to read Numbered Foot Marking On Outside Of Cable Jacket
• 24AWG solid bare copper conductor
• Pairs are wrapped in a mylar foil aluminum shield/wrap
• Meets or exceeds Cat5e specifications
• High-density polyethylene insulation, PVC jacket
• Foot-marked cable packaged in EZ pull box
• Ideal for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 100 Vg-AnyLAN(IEEE 802.12), Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155 and voice
• CM/CMR rated for use in walls and conduit in ceiling
• verified compliant with EIA/TIA standards by UL and ETL
• UL/CSA listed

Cost $ 189 /1000 FT -Please Call For Discounts! (866) 342-3721

Tough CAT1000 Data Cables- Outdoor Rated CAT 6 Cable-For industrial and harsh environments- There are minimum purchasing requirements - please call (866) 342-3721 for details.Part Number: Plenum Innerduct 1105508-Plenum Part Number: Plenum Innerduct 1005508-RiserPart Number: Plenum Innerduct 1105708-PatchToughCAT1000 Data Cables-For industrial and harsh environments / TIA/EIA Category 6 UTP / 4 pair 23 AWG plenum and riser / 24 AWG patchcord

RATINGS & SPECIFICATIONS
Exceeds TIA/EIA-568-B.2-1 Category 6, ISO/IEC 11801; Plenum meets CMP, FT-6; Riser meets CMR, FT-4

Outdoor Cables

D700L, D703L, D740L, D750L, R700L, DR700L, R740L, DR740L, S423L, S448L, C227L and C1017L series Outdoor Cables-Long-haul cables-Aerial Cables- Burieal Cable-Cable Duct and low temperature conditions .

Chromatic Technologies offers over 200 versions of outdoor cables. They are designed to handle everything Mother Nature can throw at them and keep a network running. They're designed for long haul networking, interbuilding, campus LAN, trunking and local loop applications for interbuilding, above or below ground conduit, direct buried or lashed installations. They handle IEEE 802.3 for 1000 Base SX/LX (1000 Mbps), 100 Base F (100 Mbps) and 10 Base F (10 Mbps); ATM 155 Mbps, 622 Mbps, 1.2/2.4 Gbps; Fibre Channel FC-PH (1062 Mbps); IEEE 802.5 (16 Mbps); FDDI (100 Mbps); ICEA 83-596; TIA/EIA-568B; BellCore GR-409 & GR-20; RUS 1753F-601 (PE 90).

Options include:
Loose buffered armored and armored single jacket (D700L & D703L)
Loose buffered dielectric single jacket and double jacket (D740L & D750L)
RUS-listed loose buffered armored flooded and armored dry blocked (R700L & DR700L)
RUS-listed loose buffered dielectric flooded and dry-blocked (R740L & DR740L)
Loose buffered single and double jacket low temperature (C227L & C1017L)
Single tube loose buffered dielectric and armored (S423L & S448L)

Features:
Loose buffered designs
Dry blocked core eliminates the need to clean the cable, saving installation time
Loose tube S-Z stranded for mid span access
Singlemode, multimode and hybrid fiber cables available
Color coded for easy identification
FDDI, ATM, Fibre Channel, Ethernet, Gigabit Ethernet and Token Ring guaranteed performance

Multi Mode Cables
Outdoor OSP
Military Cables
Security Cables
Coax Cables
Dielectric Cables
Datacom/Central Office Cables
Video Conferencing

Plenum Innerduct Carries a complete line of stub cable, transition cable, and PE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair PE 89 to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993.

Stub Cable- Transition Cable-PE 89, 25 Pair PE 89, Copper Telecom Cables,Seal Pic FSF PE 89- Transition Cables- Seal Pic FSF PE 39- Stub Cables- Direct Bury Copper Telecom Cables-Icky Pick

Plenum Innerduct Carries PE – 89 Communication Cable which comes in a six (6) pair cable configurations up to 2400 pairs manufactured for the purpose of direct burial systems communication applications in accordance with the National Electric Code.Conductor construction is soft drawn bare copper meeting the requirements of ASTM Specification B-3. The conductors are 22 awg solid copper.The conductors are insulated with polyethylene (PE) in distinctive colors to facilitate pair identification and are twisted into pairs with varying lays to minimize crosstalk.The interstices between the pairs are filled with an 80 C filling compound and covered with a low density, high molecular weight black polyethylene (PE).Plenum Innerduct Carries a complete line of stub cable, transition cable, andPE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993.

West Coast (866) 342-3721
New Southern CA Office ( 760) 471-8200
East Coast (866) 650-3282

For More Information On Any of the Products Below- Just click on the Pictures -More Information and Specifications For PE 39 and PE 89 Below

PE 89 Application:
For use in wet environments where protection from moisture is required. Approved for direct burial, duct or aerial installations when supported by a messenger.PE 89 Conductors:
Solid soft bare annealed copper. Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk.PE 89 Insulation:
Dual layer of foamed polyolefin and solid polyolefin.PE 89 Filling Compound:
Cable core is filled with an extended thermoplastic rubber (ETPR) filling the interstices between the pairs and under the core tape.PE 89 Core Wrap:
Non-hygroscopic, dielectric tape with overlap.PE89 Shield:
Corrugated, copolymer coated, 8-mil aluminum tape longitudinally applied with overlap. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.PE 89 Jacket:
Black, sunlight-resistant, linear low-density polyethylene.Additional Standards:
• ANSI/ICEA S-84-608-1994 • RUS 7 CFR 1755.890 (formerly REA PE-8

Stub Cable Stub Cable- Stub Cable is factory process filled cable that is cut to customer specified lengths eliminating time-consuming cable preparation at the customer job site. The Stub Cable features a factory installed pneumatic cable "block" on one end of the cable (a variety of cable types are available; 22, 24, 26 gauge cable with pair counts from 50 to 1800 pair sizes). The cable block prevents air and/or filling compound leakage from pressurized cable plant to non-pressurized cable plant. The cable block is typically located 120 inches from one end of the cable and is sealed using state of the art blocking compounds. The cable block is small in diameter relative to the cable diameter to minimize obstructions and clearances from adjacent cable plant. Transition cable- Transition Cable is a factory processed filled cable that is pre-cut to custom lengths. This eliminates time-consuming on-site preparation and the use of hazardous cleaning chemicals in the field. Additionally, cables can be provided with optional factory-installed connector modules and pulling eyes.

Plenum Innerduct Carries PE – 89 Communication Cable which comes in a six (6) pair cable configurations up to 2400 pairs manufactured for the purpose of direct burial systems communication applications in accordance with the National Electric Code.Conductor construction is soft drawn bare copper meeting the requirements of ASTM Specification B-3. The conductors are 22 awg solid copper.The conductors are insulated with polyethylene (PE) in distinctive colors to facilitate pair identification and are twisted into pairs with varying lays to minimize crosstalk.The interstices between the pairs are filled with an 80 C filling compound and covered with a low density, high molecular weight black polyethylene (PE).Part Numbers: Please Note after ATSPE89 or ATSPE39 is the "number of copper cables" PE 89 Cables: ATSPE89-50PE 39 Cables: ATSPE39-50

Application:

The assembly is then wrapped with two metal shield tapes:

- A corrugated .008" thick polymer coated aluminum tape and a corrugated .006" polymer coated steel tape.

REA PE-89

• CONDUCTOR:    Solid annealed bare copper, sizes 19 AWG (.9mm ), 22 AWG  (.64mm), and 24 AWG (.5mm).

  INSULATION:    Inner layer of foamed natural polyolefin covered by outer layer of solid colored polyolefin, color coded in accordance with standard telephone industry code.

  TWISTED PAIRS:    Individual conductors twisted into pairs with varying lays to minimize crosstalk and with specified color combinations to provide pair identification. 

  CABLE ASSEMBLY:    Cables having 25 pairs or less are assembled in a single group.  Cables having more than 25 pairs are assembled in units, each individually identified by color coded unit binders.  The interstices between the pairs are filled with an 80 degree Centigrade filling compound.

  CORE COVERING:    Non-hygroscopic dielectric tape.

  SHIELD:     SEALPIC-FSF-Electrically continuous 0.008 in. (0.2mm) thick polymer coated, corrugated aluminum tape applied longitudinally with overlapped edges and flooded with a flooding compound.

  JACKET:    Black polyethylene.

• IDENTIFICATION AND LENGTH MARKING:    Manufacturer's identification, pair count, conductor size, and year of manufacture are surface marked on the jacket at 2ft. intervals.  Sequentially numbered length markings are located at alternate 2 ft. intervals.