Innerduct-CONDUIT



About Us
 
cable, vdsl, patch

Innerduct-High Density Polyethlene Duct- Outside Plant Innerduct - HDPE - OSP -Plenum Innerduct- Corrugated Innerduct- Corrugated HDPE - Riser Rated Innerduct - Outside Plant Conduit - Fiber Optic duct -Pre- Installed Fiber In Duct




Plenum Innerduct an innerduct and duct supplier and distributor that specializes in fast turnaraound for a large variety of Innerduct and Raceway Products including riser innerduct, high density polyethlene duct (HDPE), Outside Plant Innerduct, HDPE, OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. Plenum Innerduct stocks many sizes of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Plenum Innerduct's HDPE innerduct is available in sizes ranging from 1/2" to 6" inches in diameter with several SDR or HDPE innerduct wall thickeness. Our corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

American Tech Suuply is an active CCR registered supplier for the United States Government

Plenum Innerduct also carries HDPE -high density polyethylene innerduct in sizes ranging from 1/2" to 6" and is avaialable ina multitude of colors. Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications.

Plenum Innerduct also carries Ribbed wall innerduct which innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.

Our Tracer wire innerduct provides a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.

 

UL Listed-We Now Offer Pre- Installed Fiber Cable In Our Innerduct

Plenum Innerduct can ship many HDPE innerduct and HDPE duct products the same day, however on special orders and colors please be advised that we require 7-10 days to process your innerduct order. Thank you.

1/2" TO 6" Innerduct Diameter Sizes

Colors and Identification

  • Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
  • Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.

Other Identification

  • Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
  • Custom imprints such as company name, project name or any other special identification markings also available

Options

  • Lubrication
  • Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
  • Pre-installed pull tape, tracer tape
Smooth Wall Innerduct 1/2" to 6" Diameter

Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications.
Ribbed Wall Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Blue Diamond’s ribbed wall innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.
Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.
Figure 8 Duct Smooth Wall Innerduct 1/2" to 6" Diameter

Blue Diamond’s figure 8 innerduct features a high tensile galvanized support strand for aerial placement of duct. The support strand is an integral component of the co-extruded duct.

Plenum Available at 1- 1/2" and HDPE Innerduct Available in 1/2" to 6" Sizes

Pricing for 1" & 1.25" Plenum Innerduct- Is In "RED" [prices do not include shipping, FOB point PA]

Part No
Description
Ft
Price
P-100T-5000 1" Plenum Innerduct w/tape [REEL]
5000
$7650.00
P-100T-1000 1" Plenum Innerduct w/tape [COIL]
1000
$1550.00
P-100T-500 1" Plenum Innerduct w/tape [COIL]
500
$780.00
P-100T-250 1" Plenum Innerduct w/tape [COIL]
250
$399.00
P-125T-5000 1 ¼” Plenum Innerductw/tape [REEL]
5000
$8700.00
P-125T-1000 1 ¼” Plenum Innerductw/tape [COIL]
1000
$1795.00
P-125T-500 1 ¼” Plenum Innerductw/tape [COIL]
500
$899.00
P-125T-250 1 ¼” Plenum Innerductw/tape [COIL]
250
$479.00

Pricing for 1" & 1.25" HDPE Innerduct *HDPE orders under 5000 ft subject to a $60.00 reel charge, Coil prices listed

Part No
Description
Ft
Price
PEC-100T-5000 1" HDPE Innerduct w/tape [REEL]
5000
$1449.00
PEC-100T-1000 1" HDPE Innerduct w/tape [COIL]
1000
$289.00
PEC-100T-500 1" HDPE Innerduct w/tape [COIL]
500
$145.00
PEC-100T-250 1" HDPE Innerduct w/tape [COIL]
250
$72.50
   
PEC-125T-5000 1 ¼” HDPE Innerductw/tape [REEL]
5000
$1465.00
PEC-125T-1000 1 ¼” HDPE Innerductw/tape [COIL]
1000
$299.00
PEC-125T-500 1 ¼” HDPE Innerductw/tape [COIL]
500
$175.00
PEC-125T-250 1 ¼” HDPE Innerductw/tape [COIL]
250
$79.00

Pricing for 1-1/2" Plenum & HDPE innerduct - For Larger Diameter Sizes- Please Call (866) 342-3721 First Due To The Fluctuating Oil and Resin Wholesale Prices

Part No
Description
Ft
Price
PEC-150T-5000 1 ½ " HDPE Innerduct w/tape [REEL]
5000
$1950.00
PEC-150T-1000 1 ½ " HDPE Innerduct w/tape [COIL]
1000
$349.00
PEC-150T-500 1 ½ " HDPE Innerduct w/tape [COIL]
500
$199.00
PEC-150T-250 1 ½ " HDPE Innerduct w/tape [COIL]
250
$79.00
P-150T-5000 1 ½” PLENUM Innerductw/tape [REEL]
5000
CALL
P-1505T-1000 1 ½” PLENUM Innerductw/tape [COIL]
1000
CALL
P-150T-500 1 ½” PLENUM Innerductw/tape [COIL]
500
CALL
P-150T-250 1 ½” PLENUM Innerductw/tape [COIL]
250
CALL

Volume discounts always apply. Please call our sales offices to obtain custom quotes

Prices reflect COD and do not include shipping or processing fees.

Corrugated HDPE (High Density Polyethylene) Reel Dimensions
ETL verified

SIZE
Color
Part Number
Nominal ID (Inside)
Nominal OD (Outside)
Pull Tape
Reel Size
Reel Length (Feet)
1 inch
Orange
PEC-100T-1000
1.049"
1.365"
900 lb
48-30-24
1000 Feet
1 inch
Orange
PEC-100T-1800
1.049"
1.365"
900 lb
48-30-24
1800 Feet
1 inch
Orange
PEC-100T-2500
1.049"
1.365"
900 lb
66-41-24
2500 Feet
1 inch
Orange
PEC-100T-5000
1.049"
1.365"
900 lb
72-41-24
5000 Feet
1 inch
Orange
PEC-100T-6500
1.049"
1.365"
900 lb
72-45-24
6500 Feet
1 inch
Orange
PEC-100T-8000
1.049"
1.365"
900 lb
82-41-24
8000 Feet
1 1/4"
Orange
PEC-125T-1000
1.250"
1.550"
900 lb
48-30-24
1000 Feet
1 1/4"
Orange
PEC-125T-2500
1.250"
1.550"
900 lb
66-41-24
2500 Feet
1 1/4"
Orange
PEC-125T-4000
1.250"
1.550"
900 lb
72-41-24
4000 Feet
1 1/4"
Orange
PEC-125T-5000
1.250"
1.550"
900 lb
72-41-24
5000 Feet
1 1/4"
Orange
PEC-125T-6000
1.250"
1.550"
900 lb
82-41-24
6000 Feet
1 1/4"
Orange
PEC-125T-6500
1.250"
1.550"
900 lb
82-41-24
6500 Feet

Corrugate HDPE (High Density Polyethylene) Reel Dimensions
ETL verified

Size
Color
Part Number
Nominal ID
Nominal OD
Pull Tape
Coil Length
1 Inch
Orange
PEC-100T-250
1.049"
1.365"
900 lb
250 Feet
1 Inch
Orange
PEC-100T-500
1.049"
1.365"
900 lb
500 Feet
1 1/4"
Orange
PEC-125T-250
1.250"
1.550"
900 lb
250 Feet
1 1/4"
Orange
PEC-125T-500
1.250"
1.550"
900 lb
500 Feet

How to build a part number
 

Prefix

Size

Wall Thickness

Color

Stripes

Ribbed interior

Tape

BDI

06 = ½”

2 = SDR 9

OR = Orange

ORS =Orange Stripe

RI

T10 = 1000# tape
 

09 = ¾’

3 = SDR 11

BL = Blue

BLS = Blue Stripe

  

T12.5 = 1250# tape
 

11 = 1”

4 = SDR 13.5

BK = Black

BKS = Black Stripe

  

T18 = 1800 # tape
 

13 = 1 ¼”

5 = SCH 40

GR = Green

GRS = Green Stripe

  

T25 = 2500# tape
 

16 = 1 ½”

6 = SDR 15.5

RD = Red

RDS = Red Stripe

  

MT = 1250# detectable tape
 

21 = 2”

7 = SCH 80

YL = Yellow

YLS = Yellow Stripe

    
 

31 = 3”

8 = SDR 17

WH = White

WHS = White Stripe

    
 

41 = 4”

  

GY = Gray

GYS = Gray Stripe

    
 

51 = 5”

  

BR = Brown

BRS = Brown Stripe

    
 

61 = 6”

  

BF = Buff

BF = Buff Stripe

    
     

TC = Terra Cotta

TCS = Terra Cotta Stripe

    
     

LI = Lilac

LIS = Lilac Stripe

Duct Plugs

Blue Diamond duct plugs seal your conduit or innerduct from water, animals, debris or any other underground intrusion. Available in various sizes and models, duct plugs are designed for easy retrofitting and removal. Duct plugs help protect and seal occupied and unoccupied conduit and innerduct in an extensive range of applications.


See below for our prices on 5000 ft Rolls of corrugated innerduct. If you require less than 5000 feet, please call our offices at our toll free number

Plenum Innerduct is a supplier of Innerduct, OSP, HDPE, Riser Rated Innerduct, Plenum Innerduct, Corrugated duct, Outside Plant Conduit, Fiber Optic Duct, ETL Verified Conduit

SIZE
Color
Part Number
Nominal ID (Inside)
Nominal OD (Outside)
Pull Tape
Reel Size
Reel Length (Feet)
1 inch
Orange
PEC-100T-1000
1.049"
1.365"
900 lb
48-30-24
1000 Feet
1 inch
Orange
PEC-100T-1800
1.049"
1.365"
900 lb
48-30-24
1800 Feet
1 inch
Orange
PEC-100T-2500
1.049"
1.365"
900 lb
66-41-24
2500 Feet
1 inch
Orange
PEC-100T-5000
1.049"
1.365"
900 lb
72-41-24
5000 Feet
1 inch
Orange
PEC-100T-6500
1.049"
1.365"
900 lb
72-45-24
6500 Feet
1 inch
Orange
PEC-100T-8000
1.049"
1.365"
900 lb
82-41-24
8000 Feet
1 1/4"
Orange
PEC-125T-1000
1.250"
1.550"
900 lb
48-30-24
1000 Feet
1 1/4"
Orange
PEC-125T-2500
1.250"
1.550"
900 lb
66-41-24
2500 Feet
1 1/4"
Orange
PEC-125T-4000
1.250"
1.550"
900 lb
72-41-24
4000 Feet
1 1/4"
Orange
PEC-125T-5000
1.250"
1.550"
900 lb
72-41-24
5000 Feet
1 1/4"
Orange
PEC-125T-6000
1.250"
1.550"
900 lb
82-41-24
6000 Feet
1 1/4"
Orange
PEC-125T-6500
1.250"
1.550"
900 lb
82-41-24
6500 Feet

Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. It¹s ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

** Core rebates are available for reels broken down and returned to the manufacturer. Call our offices for details

Prices reflect COD and do not include shipping or processing fees. Please add a 3% minimum charge for all credit card orders.

Slit Duct-Endot Slit Duct-Slit Innerduct-Innerduct-Riser Rated Innerduct

ROCKAWAY, NJ - We also specialize in last minute rapid turnaround and delivery. our new corrugated slit duct is made of low-density polyethylene plastic for greater flexibility when joining and racking innerducts. Easy to use, it slides readily over fiber optic cable and inside innerduct. The slit duct is offered in 250-foot lengths that can be cut for application in the field. It is available in high-visibility orange in sizes from 1/2" ID through 2" ID.innerduct, corrugated inneduct, and plenum innerduct that is also ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct.

Part Number
Description
Packaging
List Price- Please Call For Discounts
ICS 050 41 01 02-250
1/2 " Corrugated Split Duct
250 Foot Coil
$ .45 Foot
ICS 075 41 01 02-250
3/4" Corrugated Split Duct
250 Foot Coil
$ .55 Foot
ICS 100 41 01 02-250
1" Corrugated Split Duct
250 Foot Coil
$ .68 Foot
ICS 125 41 01 02-250
1 1/4" Corrugated Split Duct
250 Foot Coil
$ .85 Foot
ICS 150 41 01 02-250
1" Corrugated Split Duct
250 Foot Coil
$.95 Foor
ICS 150 41 01 02-250
1" Corrugated Split Duct
250 Foot Coil
$ 1.15 Foot

OurPlenum Innerduct Meets UL 910 & UL 2024- New 85% Fill Ratio Cable Guide!

Plenum Innerduct also carries a complete line of plenum innerduct and plenum raceway products including Plenum Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more. Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier-Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Pur Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available..

Corrugated Plenum Specifications- Reel Sizes Below

Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

Plenum Innerduct provides turnaraound for corrugated innerduct by providing rapid shipping service that we have in stock including a complete Line of ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. Plenum innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. Our plenum innerduct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Our Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is tandard. Custom options, such as multiple colors per reel and Slit Duct, are also available.This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

Corrugated Plenum Specifications- Reel Sizes Below

SIZE
Color
Part Number
Nominal ID (Inside)
Nominal OD (Outside)
Pull Tape
Reel Size
Reel Length (Feet)
1 inch
Orange
PEC-100T-1000
1.049"
1.365"
900 lb
48-30-24
1000 Feet
1 inch
Orange
PEC-100T-1800
1.049"
1.365"
900 lb
48-30-24
1800 Feet
1 inch
Orange
PEC-100T-2500
1.049"
1.365"
900 lb
66-41-24
2500 Feet
1 inch
Orange
PEC-100T-5000
1.049"
1.365"
900 lb
72-41-24
5000 Feet
1 inch
Orange
PEC-100T-6500
1.049"
1.365"
900 lb
72-45-24
6500 Feet
1 inch
Orange
PEC-100T-8000
1.049"
1.365"
900 lb
82-41-24
8000 Feet
1 1/4"
Orange
PEC-125T-1000
1.250"
1.550"
900 lb
48-30-24
1000 Feet
1 1/4"
Orange
PEC-125T-2500
1.250"
1.550"
900 lb
66-41-24
2500 Feet
1 1/4"
Orange
PEC-125T-4000
1.250"
1.550"
900 lb
72-41-24
4000 Feet
1 1/4"
Orange
PEC-125T-5000
1.250"
1.550"
900 lb
72-41-24
5000 Feet
1 1/4"
Orange
PEC-125T-6000
1.250"
1.550"
900 lb
82-41-24
6000 Feet
1 1/4"
Orange
PEC-125T-6500
1.250"
1.550"
900 lb
82-41-24
6500 Feet

 

We can deliver a 500 Foot Reel of Innderduct to Most Locations In the United States For about $150.00 Per 500 Foot Coil

 

"Contractor Installed the wrong duct & fiber needs to be installed this weekend?

"Your local distributor has no duct in stock or has the wrong duct and needs it right away?"

"You have everything, the fiber cable, testers, jacks, but the duct- and you need it right away?"- We specialize in Rapid- 24- 48 Hour Turnaround- Call us today at (866) 650-DATA

 

Cable Guide

View PDF White Paper On Cable Guide here

Cable Guide fabric innerduct that is equivalent to Maxcell allows you to place the maximum number of cables in any type of conduit network structure. By taking the shape of the cables placed within, Cable Guide allows you to utilize up to 80% of available duct space- Click Here For Complete Information.

HDPE Innerduct Specifications Call For Pricing

Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

HDPE Innerduct Specifications

Looking for an alternative conduit source?

We offer superior quality conduit at competitive prices and immediate service.