Plenum Innerduct


About Us
cable, vdsl, patch

Plenum Duct-Innerduct-Plenum Innerduct- Corrugated Innerduct- Corrugated Raceway- Plenum

American Data Supply Guarantees "the Best Pricing On All Innerduct"

Plenum Innerduct

Plenum Innerduct Carries a complete line of plenum innerduct and plenum raceway products including Plenum Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more. Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier-Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Our Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard.

Smoothwall Innerduct

Low Smoke Zero Halogen Innerduct

Corrugated Innerduct

Plenum Innerduct

 

Maxcell Innerduct

 

Custom options, such as multiple colors per reel and Slit Duct, are also available. We have three manufactures including Premier Corrugated HDPE which is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. Corrugated plenum innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1", 11/4" and 11/2". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

Plenum Innerduct an innerduct and duct supplier specializes in fast turnaraound for a Complete Line of Innerduct and Raceway Products including Innerduct, High Density Polyethlene Duct, Outside Plant Innerduct, HDPE, Most OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. Plenum Innerduct's HDPE innerduct is available in sizes ranging from 1/2" to 6" inches in diameter with several SDR or HDPE innerduct wall thickeness. Plenum Innerduct stocks many sizes of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Our corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

Plenum Innerduct will provide all your innerduct needs from one 250 coil to a several truckloads of 6" HDPE. Call us today for a competitive price and let us take care of all the logistics of delivering our product to your door.

American Data Supply Guarantees "the Best Pricing On All Innerduct."

American Data Supply is an active CCR registered supplier for the United States Government

We Can Ship the Same Day! Many Colors Available!

SEE BELOW ORDERING INFO for 1" & 1.25" Plenum Innerduct- Is In "RED" [prices do not include shipping, FOB point PA]

OurPlenum Innerduct Meets UL 910 & UL 2024- New 85% Fill Ratio Maxcell!

Plenum Available at 1- 1/2" and HDPE Innerduct Available in 1/2" to 6" Sizes

Pricing for 1" & 1.25" Plenum Innerduct- Is In "RED" [prices do not include shipping, FOB point PA]

Premier Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation.

Premier Plenum is offered in 1", 11/4" and 11/2, with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

Future growth or maintenance of your interior cable system is made easy with Premier Plenum.

Plenum Reels Ordering Information

Size Color Part No. Nominal
i.d.
Nominal
O.D.
Pull Tape Reel Size Reel
Length (ft.)
Pricing- Call- We cannot Offer ONLINE Pricing Due To Daily Prices in Oil and Resin Prices
1" Orange P-100T-500 1.049" 1.35" 900 lb 36-36-21 500  
1" Orange P-100T-1000 1.049" 1.35" 900 lb 36-36-21 1000  
1" Orange P-100T-2000 1.049" 1.35" 900 lb 44-36-21 2000  
1" Orange P-100T-2800 1.049" 1.35" 900 lb 48-41-24 2800  
1" Orange P-100T-5000 1.049" 1.35" 900 lb 66-41-24 5000  
1" Orange P-100T-6000 1.049" 1.35" 900 lb 72-41-24 6000  
1" Orange P-100T-9000 1.049" 1.35" 900 lb 82-41-24 9000  
11/4" Orange P-125T-700 1.25" 1.56" 900 lb 36-36-21 700  
11/4" Orange P-125T-1500 1.25" 1.56" 900 lb 44-36-21 1500  
11/4" Orange P-125T-1800 1.25" 1.56" 900 lb 48-41-24 1800  
11/4" Orange P-125T-3400 1.25" 1.56" 900 lb 66-41-24 3400  
11/4" Orange P-125T-4000 1.25" 1.56" 900 lb 72-41-24 4000  
11/4" Orange P-125T-6000 1.25" 1.56" 900 lb 82-41-24 6000  
11/2" Orange P-150T-500 1.57" 1.80" 900 lb 36-36-21 500  
11/2" Orange P-150T-700 1.57" 1.80" 900 lb 44-36-21 700  
11/2" Orange P-150T-1000 1.57" 1.80" 900 lb 48-41-24 1000  
11/2" Orange P-150T-2500 1.57" 1.80" 900 lb 66-41-24 2500  
11/2" Orange P-150T-3500 1.57" 1.80" 900 lb 72-41-24 3500  
11/2" Orange P-150T-5000 1.57" 1.80" 900 lb 82-41-24 5000  

Plenum Coils

Size Color Part No. Nominal
i.d.
Nominal
O.D.
Pull Tape Coil
Length (ft.)
1" Orange P-100T-500 1.049" 1.35" 900 lb. Up to 500
1 1/4" Orange P-125T-500 1.25" 1.56" 900 lb. Up to 500
1 1/2" Orange P-150T-350 1.57" 1.80" 900 lb. Up to 350

Test Results (Using Test Method UL-2024)

Properties Value
Smoke peak optical 0.02
Smoke average optical density 0.01
Max. flame spread distance (ft.) 1.5'
Max. flame temperature 554°

Sample Part Number

P 100 T S 2500
Plenum 1" (I.D.) Polyester Tape *Slit Duct
(optional)
Put-Up
* Pull tape not available w/ Slit Duct

Split Corrugated

Features & Benefits

  • No special tools required, simply twist locks together
  • Pre-slit design for easy installation over existing cables
  • Flexible corrugated design, readily adapts to cable orientation
  • Lightweight coils for easy deployment
  • Bright orange color for quick identification
  • Available in several diameters from 3/4" to 2" for protecting single or multiple cables

GENERAL INFORMATION

Our Slit is a corrugated slit conduit for use where additional protection and identification is required, such as in underground handholes. Available in bright orange color for rapid identification or aerial (UV formulated) black for use in areas where exposure to sunlight will occur. Fiber-Guard Slit is manufactured in five diameters from 3/4" to 2" in standard 250-ft.coils. Special lengths can be made available upon request but minimum quantities may apply.

Description Shipping Weight
Fiber-Guard Slit Orange 3/4", 250' coil 11.8 lbs
Fiber-Guard Slit Black 3/4", 250' coil 11.8 lbs
Fiber-Guard Slit Orange 1", 250' coil 16.5 lbs
Fiber-Guard Slit Black 1", 250' coil 16.5 lbs
Fiber-Guard Slit Orange 1-1/4", 250' coil 22.9 lbs.
Fiber-Guard Slit Black 1-1/4", 250' coil 22.9 lbs.
Fiber-Guard Slit Orange 1-1/2", 250' coil 26.3 lbs.
Fiber-Guard Slit Black 1-1/2", 250' coil 26.3 lbs.
Fiber-Guard Slit Orange 2", 250' coil 28.3 lbs.
Fiber-Guard Slit Black 2", 250' coil 28.3 lbs.
Trade Size Average Outside Diameter OD(inches) Average Inside Diameter ID (inches) Weight per Foot (pounds)
3/4" 0.930 0.750 0.037
1" 1.315 1.020 0.057
1-1/4" 1.630 1.330 0.082
1-1/2" 1.875 1.540 0.096
2" 2.300 2.010 0.104


• Flexible and can be worked easily in tight areas.
• Ribbed duct is available with SILICORE® Super Slick Permanent Lining.
• Available with sequential markings in feet or meters.
• Can withstand typical pulling loads and is highly resistant to crushing forces.
• High Density Polyethylene (HDPE) resists oils, gasoline and other compounds.• Outside ribbed is ideal when installing multiple sub-ducts into a larger main duct.

 

Ribbed
Corrugated
Figure 8
Aerial
Piggyback
Pinpoint
Cablecon
Plenum (Fire Jacket)
Microduct
Accessories

 

Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

We Carry A Complete Array of Innerduct Couplers

Future growth or maintenance of your interior cable system is made easy with innerduct or raceway systems below-

Raceway Systems-

UL Listed

We can deliver a 500 Foot Reel of Innderduct (NOT PLENUM) to Most Locations In the United States For As Little As $150.00 Per 500 Foot Coil

Plenum Innerduct - Specializes In Rapid Turnaround

"Last Minute Change Orders" ?- Can't get your product from your local distributor?- Your Contractor Installed the wrong duct and you need something right away?- "Forgot about the duct and fiber needs instaled over the weekend?" - "Maybe need something shipped in 48 hours?- We specialize in last minute turnarounds- Premier prides itself as a rapid- turn around specialist as we want to earn your business! Call us for your large projects as well- GOVERNMENT-MILITARY WELCOME!

CALL TODAY (866) 650-DATAor (866) 342-3721

Colors and Identification

  • Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
  • Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.

Other Identification

  • Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
  • Custom imprints such as company name, project name or any other special identification markings also available

Options

  • Lubrication
  • Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
  • Pre-installed pull tape, tracer tape
Smooth Wall Innerduct 1/2" to 6" Diameter

Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications.

Ribbed Wall Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Blue Diamond’s ribbed wall innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.

Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.

Figure 8 Duct Smooth Wall Innerduct 1/2" to 6" Diameter

Blue Diamond’s figure 8 innerduct features a high tensile galvanized support strand for aerial placement of duct. The support strand is an integral component of the co-extruded duct.

How to build a part number
 

Prefix

Size

Wall Thickness

Color

Stripes

Ribbed interior

Tape

BDI

06 = ½”

2 = SDR 9

OR = Orange

ORS =Orange Stripe

RI

T10 = 1000# tape

 

09 = ¾’

3 = SDR 11

BL = Blue

BLS = Blue Stripe

 

T12.5 = 1250# tape

 

11 = 1”

4 = SDR 13.5

BK = Black

BKS = Black Stripe

 

T18 = 1800 # tape

 

13 = 1 ¼”

5 = SCH 40

GR = Green

GRS = Green Stripe

 

T25 = 2500# tape

 

16 = 1 ½”

6 = SDR 15.5

RD = Red

RDS = Red Stripe

 

MT = 1250# detectable tape

 

21 = 2”

7 = SCH 80

YL = Yellow

YLS = Yellow Stripe

   
 

31 = 3”

8 = SDR 17

WH = White

WHS = White Stripe

   
 

41 = 4”

 

GY = Gray

GYS = Gray Stripe

   
 

51 = 5”

 

BR = Brown

BRS = Brown Stripe

   
 

61 = 6”

 

BF = Buff

BF = Buff Stripe

   
     

TC = Terra Cotta

TCS = Terra Cotta Stripe

   
     

LI = Lilac

LIS = Lilac Stripe

Duct Plugs

Blue Diamond duct plugs seal your conduit or innerduct from water, animals, debris or any other underground intrusion. Available in various sizes and models, duct plugs are designed for easy retrofitting and removal. Duct plugs help protect and seal occupied and unoccupied conduit and innerduct in an extensive range of applications.

Custom Colors Are Available

Striping-Private Labeling Also Available

Looking for a reliable- Alternative Conduit Source?

We offer plenum innerduct from Premier Conduit who is a manufacturer of plenum, riser and corrugated conduit. We offer superior quality conduit at competitive prices and immediate service. Call us today (866) 650-DATA or see our product sheets. Premier Corrugated Duct- (Outside Plant)

Corrugated Plenum Innderduct Information

Corrugated Plenum Innerduct/Duct - Corrugated Duct Specifications

SIZE Color Part Number Nominal ID (Inside) Nominal OD (Outside) Pull Tape Reel Size Reel Length (Feet)
1 inch Orange P-100T-1000 1.049" 1.365" 900 lb 48-30-24 1000 Feet
1 inch Orange P-100T-1800 1.049" 1.365" 900 lb 48-30-24 1800 Feet
1 inch Orange P-100T-2500 1.049" 1.365" 900 lb 66-41-24 2500 Feet
1 inch Orange P-100T-5000 1.049" 1.365" 900 lb 72-41-24 5000 Feet
1 inch Orange P-100T-6500 1.049" 1.365" 900 lb 72-45-24 6500 Feet
1 inch Orange P-100T-8000 1.049" 1.365" 900 lb 82-41-24 8000 Feet
1 1/4" Orange P-125T-1000 1.250" 1.550" 900 lb 48-30-24 1000 Feet
1 1/4" Orange P-125T-2500 1.250" 1.550" 900 lb 66-41-24 2500 Feet
1 1/4" Orange P-125T-4000 1.250" 1.550" 900 lb 72-41-24 4000 Feet
1 1/4" Orange P-125T-5000 1.250" 1.550" 900 lb 72-41-24 5000 Feet
1 1/4" Orange P-125T-6000 1.250" 1.550" 900 lb 82-41-24 6000 Feet
1 1/4" Orange P-125T-6500 1.250" 1.550" 900 lb 82-41-24 6500 Feet

Plenum Coil Specifications

Size Color Part Number Nominal ID Nominal OD Pull Tape Coil Length
1 Inch Orange P-100T-250 1.049" 1.365" 900 lb 250 Feet
1 Inch Orange P-100T-500 1.049" 1.365" 900 lb 500 Feet
1 1/4" Orange P-125T-250 1.250" 1.550" 900 lb 250 Feet
1 1/4" Orange P-125T-500 1.250" 1.550" 900 lb 500 Feet

Plenum Test Results ETL Listed

Properties Test Method Value
Smoke Peak Optical UL-2024 0.02
Smoke Average Optical Density UL-2024 0.01
Maximum Flame Spread Distance-(Feet) UL-2024 1.5'
Maximum Flame Temperature UL-2024 554

Home | Cables | Switches | Contact Us | Our Team | Locations









Underground Vaults