10Base-T Fiber Optic Media Converter-Fiber Optic Media Converter-Standalone Fiber
Optic Media Converter- Fiber Optic Switch-Gigabit Ethernet Fiber Optic Switch
American
Data Supply carries a complete line of10Base-T Fiber Optic Media Converters,Fiber
Optic Media Converter,Standalone Fiber Optic Media Converter, Fiber Optic Switch,
Gigabit Ethernet Fiber Optic Switch from TC Comm, MRV, Netgear, Telco Systems,
Allied Telsyn and more.
10/100Mbps to 100Mbps, or 1000Mbps to 1000Mbps Ethernet Extends Network Distances up to 60 km Bi-Directional WDM Single Fiber Models Chassis-based or Standalone Models Auto MDI/MDX, Auto-Negotiation, LinkSentryTM
SNMP, Console and Web-based Management
The Raven Series of Converters offers connectivity solutions for a broad range of environments. Whether connecting two remote locations, or solving a difficult wiring closet issue, the Raven Series has a product to meet your needs. The standalone converters are ideal for remote locations requiring a single, cost effective fiber link. These converters may be consolidated into a 19 inch rack system, allowing for utilization of a common product in the main or intermediate distribution frame and at the remote location. For those needing visibility into how their network is operating, a managed media conversion system is available.
The Raven Series is designed with ease of use in mind. The UTP port will auto-detect the cabling type (cross over or straight through), the polarity of the pins, the speed of the port and the mode of the port without any user intervention. No more concerns about what type of device the converter is connecting, whether hub or server. The broad range of media for the fiber port makes for optimal flexibility in designing the network, and upgrading the network in the future.
This product has been designed with diagnostic functions as well. The LinkSentryTM feature allows for passing through physical layer failures from one media to the other. This allows for a higher reliability in your network by making all components aware of network failures as they occur. The managed system takes this further by sending traps when link failures are seen on the ports.
The ease of use, flexibility in network design, Advanced diagnostic capabilities and management features make the Raven series of converters the optimal conversion product for your network.
Convert Gigabit UTP to Gigabit Multi-mode or Single Mode Fiber Interconnect across distances from 220m to 70km Switch Selectable MDI/MDIX (module)
Auto-Converts TX to LX and SX
Media Conversion Systems
MiLAN's MIL-9100 and MIL-9200 Media Conversion Systems provide a compact and powerful way to connect UTP and fiber at Ethernet, Fast Ethernet, and Gigabit speeds. The MIL-9100 and MIL-9200 enhance the performance and longevity of hubs, switches, and routers by simply and affordably combining the speed of fiber with the ease of copper.
The MIL-9100 is a 1U 19" rack mountable unit allowing you to mix-and-match up to 8 system modules for converting Unshielded Twisted Pair to fiber. Connection options include SC, ST, and MT-RJ in either single-mode or multimode. Other module options include UTP to BNC, fault tolerant transceivers, and a redundant power supply. The MIL-9200 Series provides the same degree of flexibility in a 2U 19" rack mountable unit with slots for up to 16 modules.
MiLAN's optional Fast ManageTM SNMP management software provides simple configuration of individual modules in the chassis. With a designated master unit, daisy-chain up to four additional systems in a single rack. All MIL-9100 and MIL-9200's come with a load balancing, hot-swappable, redundant power supply, and provide maximum design dexterity for media conversion when and where your network requires.
Physical layer product (protocol independent) Converts electrical signals to optical signals, optical signals to optical signals, and vice versa. Physical layer product designed specifically for ATM Networks
Add fiber when you need it and where you need it
ATM Media Conversion
MiLAN’s MIL-185C UTP to multi-mode fiber optic converter is an OC-3 speed converter that converts electrical signals to optical signals. The MIL-185C has a compact form factor and is shipped with an external power source.
MiLAN’s MIL-195C UTP to single-mode fiber optic converter is an OC-3 speed converter that converts electrical signals to optical signals. The MIL-195C has a compact form-factor and is shipped with an external power source.
The 225C Converter is a high speed converter which converts multi-mode fiber to single-mode fiber optical signals for Fast Ethernet or ATM (OC-3) environments.
The MIL-185C and MIL-195C allow for using less expensive UTP Ports on ATM NIC’s or switches and utilize single or multi-mode fiber when and where it is needed.
Network administrators and installers desiring to link their Fast Ethernet or ATM multi-mode equipment to single-mode Fast Ethernet or ATM to increase signal driving distance will find the MIL-225C converter an immense benefit.
These products convert OC-3 electrical signals used in UTP wires, to optical signals used in single or multi mode fiber optics cables. The allowable fiber optic cable distance is 15km for the single mode and 2km for the multi mode. The allowable UTP category 5 wire is 100 meters.
Converts UTP to Multi-mode or Single Mode Fiber Extends Interconnect across distances up to 100 km Features LinkSentryTM detection
Converts TX to FX
Fast Ethernet Media Conversion
MiLAN's Fast Ethernet Media Converters provide maximum dexterity for interconnecting and managing various media and rate types. Our ClassicConverterTM, C2000 and S3000 Series of Fast Ethernet converters provide an ideal solution for switching UTP to fiber and multi-mode fiber to single mode, either within our rack-mounted Media Conversion Systems or as standalone units.
Available fiber distances range from 2km in multi-mode up to 100km in single mode, flexibly linking distant networks. An optional SNMP management module in the Media Conversion Systems allows monitoring or configuration of modules on an individual basis, allowing system administrators to remotely verify link and status information.
10/100Mbps Media Conversion for All Environments
MiLAN’s MIL-S3000 Switch family converts 10/100Mbps UTP to 100Mbps fiber and 10Mbps copper to 100Mbps copper. Support for auto-negotiation (speed and duplex mode) on a per port basis provides an ideal way to convert your legacy networks to higher speeds.
Fiber Connectivity
Wide variety of connector types for distance requirements: ST for 2km, SC for 2, 15, 40, 60 or 100km, or MT-RJ for 2km or 15km.
Extended MAC Table
Non-blocking architecture assures rapid packet delivery, with a 8,192 MAC Address table for swift lookup and packet forwarding via store-and-forward architecture.
Flexible, Simple Management
SNMP Management available when used in MiLAN’s chassis-based Media Conversion System.
MDI / MDIX
Switch selectable MDI / MDIX, back pressure in half duplex and flow control in full duplex, full wire speed forwarding, VLAN tagging packet-size throughput
Convert 10BASE-T to fiber or fiber to 10BASE-T Simplifies fiber runs to the classroom, residence, or remote site Simple to install and manage Features LinkSentryTM detection
Ethernet Media Conversion
MiLAN Ethernet Media Converters include connectivity options for virtually every networking need, including UTP to BNC and UTP to multi-mode or singlemode fiber. Connector options for fiber include SC and ST in multi-mode, and ST in singlemode. No matter the configuration, MiLAN's Media Converters provide a reliable means of migrating legacy networks to fiber without expensive hardware additions.
Ideally suited for interconnecting high-speed, half or full-duplex ports on hubs and switches, each standalone converter features LinkSentryTM remote sensing technology, allowing the converter to pass through line or loop back failures, assuring prompt notification. An optional SNMP management module in the Media Conversion Systems allows monitoring or configuration of modules on an individual basis, allowing system administrators to remotely verify link and status information.
Combine UTP and fiber at Ethernet, Fast Ethernet, and Gigabit Ethernet speeds 2U MIL-9200 fits up to 16-modules; 1U MIL-9100 fits up to 8-modules Mix media converters, rate converters, and fault-tolerant transceivers in the same chassis Management available for each system Available in 110/220 VAC and -48 VDC
Media Conversion Systems
MiLAN's MIL-9100 and MIL-9200 Media Conversion Systems provide a compact and powerful way to connect UTP and fiber at Ethernet, Fast Ethernet, and Gigabit speeds. The MIL-9100 and MIL-9200 enhance the performance and longevity of hubs, switches, and routers by simply and affordably combining the speed of fiber with the ease of copper.
The MIL-9100 is a 1U 19" rack mountable unit allowing you to mix-and-match up to 8 system modules for converting Unshielded Twisted Pair to fiber. Connection options include SC, ST, and MT-RJ in either single-mode or multimode. Other module options include UTP to BNC, fault tolerant transceivers, and a redundant power supply. The MIL-9200 Series provides the same degree of flexibility in a 2U 19" rack mountable unit with slots for up to 16 modules.
MiLAN's optional Fast ManageTM SNMP management software provides simple configuration of individual modules in the chassis. With a designated master unit, daisy-chain up to four additional systems in a single rack. All MIL-9100 and MIL-9200's come with a load balancing, hot-swappable, redundant power supply, and provide maximum design dexterity for media conversion when and where your network requires.
