|
Fiber
Optic Modems- Fiber Optic Media Converters T1/E1
Fiber Optic Modems- Traffic Control Modems- Rack
Modems-T3/ E3 Fiber Optic Modems- Async/Sync Fiber Optic Modems- Fiber Optic Transceivers-
Fiber Optic Multiplexers- Ethernet Media Converters- Telephone
Extenders-Fiber Optic Media Converters
Call for latest pricing or cluikc on the live chat button at the top of the page to talk to us.
American
Data Supply carries a complete line of fiber optic modems including traffic
control modems, central ofciec modems, stand alone modems, rack modems and
more for all your Data, Voice, Ethernet, T1/E1, T3/E3 & Audio for campus &
intra-building fiber optic network needs. General products include Fiber Optic
Modems & Multiplexers; Fiber Optic Data/Telephone Multiplexers; Fiber Ethernet
Switches, Transceivers & Media Converters and Ethernet/Fiber/RS-232 Telephone
Extenders. Specialty products include Industrial-Hardened Ethernet and Multi-Drop
Fiber Modems & Multiplexers for SCADA, Traffic Control, Security & Process
Control applications.
Fiber Optic Modems are often used to link various process control systems in manufacturing
plants, refineries, etc. It is also used to connect Remote Terminal Units to SCADA
hosts or controllers in Utility environments.
Multi-Interface Sync/Async
Fiber Optic Modems
(Model TC1705) Prices Start at $695.00 ea.
.jpg)
TC1705R
Rackmount Cards
(Housed in TCRM192 Rackmount Card Cage) Applications
The TC1705 Multi-Interface Fiber Optic Modem is intended for applications requiring
high data rates and handshaking. The
TC1705 is the ultimate "configure-it-as-you-need-it" fiber optic modem.
Ideal for applications requiring multiple interfaces, high data rates or full
handshaking, it supports synchronous and asynchronous data rates up to 256Kbps.It
supports most popular electrical interfaces including RS-232, RS-422, RS-485 (2-wire
or 4-wire), RS-530, V.35 and TTL. Electrical interfaces are modular and can be
easily changed before or after installation. Distances
up to 80km* are possible depending on various factors including electrical interface,
optical transmitter, number of fiber optic connectors and fiber type and quality.
Power redundancy is standard. Optical redundancy is optional.Diagnostics are extensive
and include a built-in Test Signal Generator, local & remote loopback tests
and LEDs for Power, Alarm, Tx, Rx and all applicable control signals. The Test
Signal Generator verifies both device and fiber optic link operation. Available
for multimode (850/1300nm) or single mode (1300/1550nm), the TC1705 is compatible
with all popular sizes and types of fiber optic cable. Fiber optic connectors
are ST or FC. Electrical connectors are DB25 female. Power is standard 12VDC,
optional 24VDC, -48VDC, 125VDC or 115/230VAC with an external power cube. The
TC1705 is available in two versions: TC1705R Rackmount Card for installation in
a 19" rack assembly (TCRM192 or TCRM196) or TC1705S Standalone version. Standalone
or rackmount versions can be mixed or matched on either end. There are two optional
versions (Model TC1705T) for extreme temperature applications (-20° to 70°C
& -40° to 80°C). Data
Rates up to 256Kbps
Distances Up to 80km*
All Popular Electrical Interfaces
Built-In Test Signal Generator
Local & Remote Loopback
Interchangeable
Interface
Supports 5 RS-232 Control Signals
Multimode & Single Mode
Mode (850/1300/1550nm)
Built-In Power Redundancy
Local Dry Contact Alarm
Relay
Standalone/Wallmount or Rackmount
High Temperature (-20°C
to 70°C & -40° to 80°C) Versions Optional
"High
Speed" Sync/Async Fiber Optic Modems
(Model TC1710) Prices Start at $895.00
ea. .jpg)
Data
Rates up to 10Mbps
Distances Up to 80km*
All Popular Electrical Interfaces
Built-In Test Signal Generator
Local & Remote Loopback
Interchangeable
Interface
Multimode & Single Mode Mode (1300/1550nm)
Built-In Power
Redundancy
Local Dry Contact Alarm Relay
Standalone/Wallmount or Rackmount
Temperature Hardened (-20°C to 70°C & -40° to 80°C) Versions
Optional Applications
The TC1710 High Speed Fiber Optic Modem is intended for applications requiring
high data rates and handshaking. 
.jpg) .jpg)
Telephone fiber modem, telephone fiber converter, telephone to fiber multiplexer,
telephone fiber mux, analog phone to fiber, POTS, 2-wire
"Quick-Talk" RS-232 or Fiber Telephone Extenders
(Model TC1900/TC1901*) Prices Start at
$980.00 ea.
Extend
Telephone Link via Fiber or Async RS-232
Async Baud Rate From 19.2Kbps
16 LEDs/4 DIP Switches for Diagnostics
PBX and Key System Compatible, FXO/FXS
Selectable
Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
Built-In Dry Contact Relay for External Alarm and Ringer Connection
12VDC,
Optional 24VDC, or 115/230VAC with Power Adapter Applications
The TC1900/1901 is often used to extend telephone service in campus networks,
power plants, substations, etc or use an existing service data channel to set
up a telephone link. It is also used to set up "Hot Links" telephone
service via existing RS-232 links on satellite, fiber optic or microwave networks.
Other applications include using the inherent benefits of fiber optics to reduce
noise/EMI or maximize security/isolation. 
  
| Media Converter |
ATSCXL-32M1-2 |
10/100 Base-TX/FX Bridge Converter 2KM, SC Connector (Multi-Mode) |
| Media Converter |
ATSCXL-32M2-2 |
10/100 Base-TX/FX Bridge Converter 2KM, ST Connector (Multi-Mode) |
| Media Converter |
ATSCXL-32S1-20 |
10/100 Base-TX/FX Bridge Converter 20KM, SC Connector (Single-Mode) |
| Media Converter |
ATSCXL-32S1-40 |
10/100 Base-TX/FX Bridge Converter 40KM, SC Connector (Single-Mode) |
| Media Converter |
ATSCXL-32S1-60 |
10/100 Base-TX/FX Bridge Converter 60KM, SC Connector (Single-Mode) |
| Media Converter |
ATSCXL-32S1-100 |
10/100 Base-TX/FX Bridge Converter 100KM, SC Connector (Single-Mode) |
| Media Converter |
ATSCXL-LFPSC-M2 |
10/100 Base-TX/FX Bridge Converter 2KM, SC Connector, with LFP Function (Multi-Mode) |
Media Converter |
ATSCXL-B32S1-20 |
10/100 Base-TX/FX Single Fiber (BIDI) Bi-Directional Converter 20Km, SC Connector (Tx:1310nm Rx:1550nm over One Fiber) |
| Media Converter |
ATSCXL-B33S1-20 |
10/100 Base-TX/FX Single Fiber (BIDI) Bi-Directional Converter 20Km, SC Connector (Tx:1550nm Rx:1310nm over One Fiber) |
| Media Converter |
ATSCXL-MTS1121-20 |
100 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 20Km) |
| Media Converter |
ATSCXL-MTS1121-40 |
101 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 40Km) |
| Media Converter |
ATSCXL-MTS1121-60 |
102 Base FX Multi-Mode to Single-Mode Converter, SC Connector (Multi-Mode 2Km to Single-Mode 60Km) |
| Media Converter |
ATSCXL-G2M1-550 |
Gigabit Ethernet 1000Mbps Media Converter, 500m, SC Connector (Multi-Mode) |
| Media Converter |
ATSCXL-G2S1-10 |
Gigabit Ethernet 1000Mbps Media Converter, 10Km, SC Connector (Single-Mode) |
| Media Converter |
ATSCXL-BG2S1-10 |
Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 10Km, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber) |
| Media Converter |
ATSCXL-BG3S1-10 |
Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 10Km, SC Connector (Tx:1550nm and Rx:1310nm Over One Fiber) |
| Media Converter |
ATSCXL-BG2S1-20 |
Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 20Km, SC Connector (Tx:1310nm and Rx:1550nm Over One Fiber) |
| Media Converter |
ATSCXL-BG3S1-20 |
Gigabit Ethernet 1000Mbps (BIDI) Bi-Directional Media Converter, 20Km SC Connector (Tx:1550nm and Rx:1310nm Over One Fiber) |
|
