 |
| |
Vertical Finger Duct- Vertical Cable Finger Duct-Vertical Cable Management Finger Duct Panels- ICC Finger Duct
 |
 |
 |
|
Save $$ on Vertical Cable Duct
Vertical Finger Duct- Can be used on Relay Racks, Data Cabinets or Wall Mounted
Plenum Innerduct Carries a complete line of vertical finger duct and horizontal finger duct at a fraction of the cost of the national distributors. So why pay more? You can buy the $ 150.00 finger duct at the national chains for less than $ 100.00 plus shipping.
Our finger duct panels and cable management finger duct panels are compatible
with all relay racks and wall mount brackets and these ICC's finger ducts are
used for general purpose control panel wiring and to route and protect wiring
in communication closets. The non-slip cover conceals all wiring and is easy to
install. The duct and cover form a flush sidewall providing increased capacity
and improved aesthetics. Slotted ducts allow horizontally routed cable and patch
cords to be placed vertically to designated ports along the width of the rack.
Panels include a cover to conceal cables.
| Part Number | Vertical Finger Duct Description | Suggested Price |
| ICCMSCC6BK | CABLE CHANNEL, VERTICAL BLACK, 6.5FT | 200.00 |
| ICCMSCCVBK | CABLE CHANNEL COVER, BLACK, 3 FT | 37.80 |
| ICCMSCMA21 | PANEL, VERT FINGER DUCT, FRONT, 4x5x35 | 56.24 |
| ICCMSCMA22 | PANEL, VERT FGR DUCT, FRNT & BCK, 4x5x35 | 102.08 |
| ICCMSCMA23 | PANEL,VERT FGR DUCT, DBL SIDE MT 4X5X35" | 85.84 |
| ICCMSCMA31 | PANEL, CABLE MANAGEMENT RING, 1RMS | 21.92 |
| ICCMSCMA32 | PANEL, CABLE MANAGEMENT RING, 2RMS | 29.92 |
| ICCMSCMA41 | PANEL, FRONT FINGER DUCT, 24-SLOT, 1RMS | 41.44 |
| ICCMSCMA42 | PANEL, FRONT FINGER DUCT, 24-SLOT, 2RMS | 58.40 |
| ICCMSCMA51 | PANEL, CABLE MANAGEMENT INTERBAY, 1RMS | 21.60 |
| ICCMSCMA52 | PANEL, CABLE MANAGEMENT INTERBAY, 2RMS | 29.76 |
| ICCMSCMA61 | PANEL, FRT-BCK FINGR DUCT, 48-SLOT, 1RMS | 47.20 |
| ICCMSCMA62 | PANEL, FRT-BCK FINGR DUCT, 48-SLOT, 2RMS | 68.80 |
| ICCMSCMA81 | PANEL, VERT FINGER DUCT, FRONT, 4x5x78 | 101.60 |
| ICCMSCMA82 | PANEL, VERT FGR DUCT, FRNT & BCK, 4x5x78 | 148.80 |
| ICCMSCMA83 | PANEL,VERT FGR DUCT, DBL SIDE MT 4X5X78" | 137.60 |
| ICCMSCMA84 | PANEL, VERT FGR DUCT, FLAT MT 4X5X78 | 104.00 |
 |
Vertical Finger Duct |
|
Our vertical finger duct is available from several manufacturers to insure to give your installation a clean and finished look. The base material of the duct is 2 mm aluminum that is painted in black electrostatic microfinish. The cover and ducts that support the cables are made of PVC that can hold up to 50 or 70 cables. The cable duct comes in either a height of 4', 6', or 7'. ICC's 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes sanp-on cover to help facilitate installation
Vertical Finger Duct- Vertical Cable Management Ducts
Part No.: ICCMSCMA12-
| PANEL, VERT FINGER DUCT, DBL, 35 H, 3X3 |
3x3 Dual Vertical Finger Duct Panel
|
ICC's Dual 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
Part No.: ICCMSCMA22-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's Dual 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
| PANEL, VERT FINGER DUCT, DBL, 35 H, 4X5 |
| 4x5 Dual Vertical Finger Duct Panel |
Part No.: ICCMSCMA82-Vertical Fiber Duct- Vertical Cable Management Duct- DUAL Vertical Cable Management Duct ON EACH SIDE : Ideal for Placement od DUAL VERTICAL FINGER DUCTS on EACH SIDE of Relay Rack-TWO Vertical Duct Per Each Side of Rack- Can be place on walls as well.
| VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT) |
78" ht., 4"x5" slotted, front, center mount design |
ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.
Part No.: ICCMSCMA11-Vertical Fiber Duct- Vertical Cable Management Duct: Ideal for Placement on EACH SIDE of Relay Rack-One Vertical Duct Per Each Side of Rack- Can be place on walls as well.
| PANEL, VERTICAL FINGER DUCT, 35 , 3X3 |
3x3 Vertical Finger Duct Panel |
ICC's 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes ?easy to remove? covers to help facilitate installation.
Part No.: ICCMSCMA21-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.
| PANEL, VERTICAL FINGER DUCT, 35 , 4X5 |
| 4x5 Vertical Finger Duct Panel |
Quest Manufacturing HF19-02-XX0 - 2 RU Horizontal Finger Duct with Cover
Quest Manufacturing HF19-02-XX0 - 2 RU Horizontal Finger Duct with Cover
Original Price: $45.00
You Save: $6.00 (13%)
If your installation needs to be cleaned up than this covered finger duct is exactly what you are looking for. The cold rolled steel 18 AWG is painted with black electrostatic microfinish with a cover and ducts made out of PVC. The 2 RU finger duct comes in either a capacity of either 190 or 200 cables.
HORIZONTAL FINGER DUCT
HORIZONTAL FINGER DUCT-HORIZONTAL CABLE MANAGEMENT DUCT
ICCMSCMA41- Horizontal Finger Duct
ICCMSCMA41 Finger Ducts on Front, 1 RMS The 1 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws.
ICCMSCMA42- Horizontal Finger Duct
The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws
ICCMSCMA42 Finger Ducts on Front, 2 RMS
ICCMSCMA61- Horizontal Finger Duct
ICCMSCMA61 Finger Ducts on Front & Rear, 1 RM
The 1 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.
ICCSMSCMA62- Horizontal Finger Duct
ICCMSCMA62 Finger Ducts on Front & Rear, 2 RMS The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.
Price $ 52.26 Call For additional discounts (866) 650-DATA
Our
ICC Finger duct panels are compatible with most racks and wall mount brackets
and ICC's finger ducts are used for general purpose control panel wiring and to
route and protect wiring in communication closets. The non-slip cover conceals
all wiring and is easy to install. The duct and cover form a flush sidewall providing
increased capacity and improved aesthetics. Slotted ducts allow horizontally routed
cable and patch cords to be placed vertically to designated ports along the width
of the rack. Panels include a cover to conceal cables. Configurations are available
for front and front & rear cable management. Package includes 12-24 x 5/8
inch pilot point rack screws, for use with distribution racks.
ITEM NUMBER DESCRIPTION
MSCMA41 Finger Ducts
on Front, 1 RMS
MSCMA42 Finger Ducts on Front, 2 RMS
MSCMA61 Finger
Ducts on Front & Rear, 1 RMS
MSCMA62 Finger Ducts on Front & Rear,
2 RMS
RMS = Rack Mount Space, 1.75 Inches
Specifications
•
Made of rigid PVC
• UL Recognized continuous use temperature: 50 °C
(122°F)
• UL94 Flammability Rating of V-0
• Provided with
mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement
for flame retardant material
Features
& Benefits
• Wide finger/slot design provides greater sidewall
rigidity and can be used with a wide range of wire bundle sizes
• Rounded
edges protects hands and wiring/cabling from abrasion
• Non-slip cover
stays in place during shipment, vibration and when in vertical orientation, eliminating
rework
• Flush cover design holds 5% more wires than traditional duct
designs
• Double scoreline allows quick modification for larger cabling
bundles saving installation time leading to a lower installed cost
•
Specially formulated lead-free material eliminates health concerns associated
with PVC that contains lead
•
Restricted slot design retains wire in slot for fast, easy wire installation or
removal
Vertical Finger Duct- Vertical Cable Management Ducts
Part No.: ICCMSCMA12-
| PANEL, VERT FINGER DUCT, DBL, 35 H, 3X3 |
3x3 Dual Vertical Finger Duct Panel Closeout Pricing Available Call ICC |
ICC's Dual 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
Part No.: ICCMSCMA22-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's Dual 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
| PANEL, VERT FINGER DUCT, DBL, 35 H, 4X5 |
| 4x5 Dual Vertical Finger Duct Panel |
Part No.: ICCMSCMA82-Vertical Fiber Duct- Vertical Cable Management Duct
| VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT) |
78" ht., 4"x5" slotted, front, center mount design |
ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.
Part No.: ICCMSCMA11-Vertical Fiber Duct- Vertical Cable Management Duct
| PANEL, VERTICAL FINGER DUCT, 35 , 3X3 |
3x3 Vertical Finger Duct Panel |
ICC's 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes ?easy to remove? covers to help facilitate installation.
Part No.: ICCMSCMA21-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.
| PANEL, VERTICAL FINGER DUCT, 35 , 4X5 |
| 4x5 Vertical Finger Duct Panel |
OUR GUARANTEE: Plenum Innerduct will also meet or beat any written quote from any supplier in the United States!
Most All Products Below Ready To Ship Same Day- See Our Sample Pricing Below or Call Us At (866) FIBER-21 or (866) 342-3721 For Project Pricing