ICC Finger Duct- Vertical Cable Finger Duct-Horizontal Finger Duct- Cable Management Finger Duct Panels- ICC Vertical Finger Duct
Save $$ on Vertical Cable Duct
 |
|
|
This vertical finger duct is sure to give your installation a clean and finished look. The base material of the duct is 2 mm aluminum that is painted in black electrostatic microfinish. The cover and ducts that support the cables are made of PVC that can hold up to 50 or 70 cables. The cable duct comes in either a height of 4', 6', or 7'.
This vertical finger duct is sure to give your installation a clean and finished look. The base material of the duct is 2 mm aluminum that is painted in black electrostatic microfinish. The cover and ducts that support the cables are made of PVC that can hold up to 50 or 70 cables. The cable duct comes in either a height of 4', 6', or 7'.
Quest Manufacturing HF19-02-XX0 - 2 RU Horizontal Finger Duct with Cover
Original Price: $45.00
You Save: $6.00 (13%)
If your installation needs to be cleaned up than this covered finger duct is exactly what you are looking for. The cold rolled steel 18 AWG is painted with black electrostatic microfinish with a cover and ducts made out of PVC. The 2 RU finger duct comes in either a capacity of either 190 or 200 cables.
Vertical Finger Duct
Plenum Innerduct Carries a complete line of vertical finger duct and horizontal finger duct at a fraction of the cost of the national distributors. So why pay more? You can buy the$ 80.00 finger duct you buy at the national chains for less than $40.00 plus shipping.
Our
ICC Finger duct panels and cable management finger duct panels are compatible
with all relay racks and wall mount brackets and these ICC's finger ducts are
used for general purpose control panel wiring and to route and protect wiring
in communication closets. The non-slip cover conceals all wiring and is easy to
install. The duct and cover form a flush sidewall providing increased capacity
and improved aesthetics. Slotted ducts allow horizontally routed cable and patch
cords to be placed vertically to designated ports along the width of the rack.
Panels include a cover to conceal cables.
HORIZONTAL FINGER DUCT-HORIZONTAL CABLE MANAGEMENT DUCT
ICCMSCMA41- Horizontal Finger Duct
ICCMSCMA41 Finger Ducts on Front, 1 RMS The 1 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws.
ICCMSCMA42- Horizontal Finger Duct
The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws
ICCMSCMA42 Finger Ducts on Front, 2 RMS
ICCMSCMA61- Horizontal Finger Duct
ICCMSCMA61 Finger Ducts on Front & Rear, 1 RM
The 1 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.
ICCSMSCMA62- Horizontal Finger Duct
ICCMSCMA62 Finger Ducts on Front & Rear, 2 RMS The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.
Price $ 52.26 Call For additional discounts (866) 650-DATA
Our
ICC Finger duct panels are compatible with most racks and wall mount brackets
and ICC's finger ducts are used for general purpose control panel wiring and to
route and protect wiring in communication closets. The non-slip cover conceals
all wiring and is easy to install. The duct and cover form a flush sidewall providing
increased capacity and improved aesthetics. Slotted ducts allow horizontally routed
cable and patch cords to be placed vertically to designated ports along the width
of the rack. Panels include a cover to conceal cables. Configurations are available
for front and front & rear cable management. Package includes 12-24 x 5/8
inch pilot point rack screws, for use with distribution racks.
ITEM NUMBER DESCRIPTION
MSCMA41 Finger Ducts
on Front, 1 RMS
MSCMA42 Finger Ducts on Front, 2 RMS
MSCMA61 Finger
Ducts on Front & Rear, 1 RMS
MSCMA62 Finger Ducts on Front & Rear,
2 RMS
RMS = Rack Mount Space, 1.75 Inches
Specifications
• Made of rigid PVC
• UL Recognized continuous use temperature: 50 °C
(122°F)
• UL94 Flammability Rating of V-0
• Provided with
mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement
for flame retardant material
Features
& Benefits
• Wide finger/slot design provides greater sidewall
rigidity and can be used with a wide range of wire bundle sizes
• Rounded
edges protects hands and wiring/cabling from abrasion
• Non-slip cover
stays in place during shipment, vibration and when in vertical orientation, eliminating
rework
• Flush cover design holds 5% more wires than traditional duct
designs
• Double scoreline allows quick modification for larger cabling
bundles saving installation time leading to a lower installed cost
•
Specially formulated lead-free material eliminates health concerns associated
with PVC that contains lead
•
Restricted slot design retains wire in slot for fast, easy wire installation or
removal
ICC Vertical Finger Duct- Vertical Cable Management Ducts
Part No.: ICCMSCMA12
| PANEL, VERT FINGER DUCT, DBL, 35 H, 3X3 |
3x3 Dual Vertical Finger Duct Panel
|
ICC's Dual 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
Part No.: ICCMSCMA22-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's Dual 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
| PANEL, VERT FINGER DUCT, DBL, 35 H, 4X5 |
| 4x5 Dual Vertical Finger Duct Panel |
Part No.: ICCMSCMA82-Vertical Fiber Duct- Vertical Cable Management Duct
| VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT) |
78" ht., 4"x5" slotted, front, center mount design |
ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.
Part No.: ICCMSCMA11-Vertical Fiber Duct- Vertical Cable Management Duct
| PANEL, VERTICAL FINGER DUCT, 35 , 3X3 |
3x3 Vertical Finger Duct Panel |
ICC's 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes ?easy to remove? covers to help facilitate installation.
Part No.: ICCMSCMA21-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.
| PANEL, VERTICAL FINGER DUCT, 35 , 4X5 |
| 4x5 Vertical Finger Duct Panel |
ICC's Dual Vertical Finger Duct Panels (side-mount) are deigned to compliment the ICC 7' and 4' Distribution rack. The panels are 4"x 5"x 35" high and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help keep cables organize and neat appearance.
| PANEL,VERT FGR DUCT, DBL SIDE MT 4X5X35" | |||
| 4X5X35", DBL SIDE MT, VERT FGR DUCT | |||
| Part No.: ICCMSCMA23 | |||
ICC's Vertical Cable Channel is designed with aluminum construction, black textured powder coated finish, light weight and sturdy, measures 6" W x 5" D x 6.5'H. And fits on the sides of individual racks but can also be used to join two 2-Post & 4-Post Racks. The Vertical Cable Channel has front swivel latches, sides and rear cable/velcro tie points, large rear openings for quick and easy cable routing and can also be mounted back to back to provide true cable management flexibility. This product is a perfect solution for moves, adds, changes of your cabling and ideal for a full length vertical cable pathway and will have the aesthetic finish of an organized distribution racks.
| CABLE CHANNEL, VERTICAL BLACK, 6.5FT | ||
| vertical cable channel | ||
| Part No.: ICCMSCC6BK | ||
ICC's 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes sanp-on cover to help facilitate installation.
| VERTICAL FINGER DUCT 78" FRONT ONLY (SIDE-MOUNT) | ||
78" ht., 4"x5" slotted, front, side mount design |
||
| Part No.: ICCMSCMA81 | ||
ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation
| VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT) | |||
78" ht., 4"x5" slotted, front, center mount design |
|||
| Part No.: ICCMSCMA82 | |||
ICC's Dual Vertical Finger Duct Panels (side-mount) are designed to compliment the ICC 7' Distribution rack. The panels are 4"x 5"x78" high and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.
| PANEL,VERT FGR DUCT, DBL SIDE MT 4X5X78" | |||
| Part No.: ICCMSCMA83 | |||
Cover is designed to fit on the front of the cable channel to provide a neat, clean and well-organized appearance.
| CABLE CHANNEL, COVER, BLACK, 3 FT | ||
| Channel Cover | ||
| Part No.: ICCMSCCVBK | ||
Part No.: ICCMSCMA12
| PANEL, VERT FINGER DUCT, DBL, 35 H, 3X3 |
3x3 Dual Vertical Finger Duct Panel Closeout Pricing Available Call ICC |
ICC's Dual 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
Part No.: ICCMSCMA22-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's Dual 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
Slotted Finger ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws.
| PANEL, VERT FINGER DUCT, DBL, 35 H, 4X5 |
| 4x5 Dual Vertical Finger Duct Panel |
Part No.: ICCMSCMA82-Vertical Fiber Duct- Vertical Cable Management Duct
| VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT) |
78" ht., 4"x5" slotted, front, center mount design |
ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.
Part No.: ICCMSCMA11-Vertical Fiber Duct- Vertical Cable Management Duct
| PANEL, VERTICAL FINGER DUCT, 35 , 3X3 |
3x3 Vertical Finger Duct Panel |
ICC's 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes "easy to remove" covers to help facilitate installation.
Part No.: ICCMSCMA21-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.
| PANEL, VERTICAL FINGER DUCT, 35 , 4X5 |
| 4x5 Vertical Finger Duct Panel |
The 1 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws
| HORIZONTAL FINGER DUCT FRONT 1RMS | |||
Panel, Horizontal, Front, 24-SLOTS, 1RMS |
|||
| Part No.: ICCMSCMA41 | |||
The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws
| HORIZONTAL FINGER DUCT FRONT 2RMS | |||
| Panel, Horizontal, Front, 24-Slots, 2RMS | |||
| Part No.: ICCMSCMA42 | |||
The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws
| HORIZONTAL FINGER DUCT FRONT/BACK 1 RMS | |||
| Panel, Horizontal, Front/Back, 24-SLOTS, 1RMS | |||
| Part No.: ICCMSCMA61 | |||
ICCSMSCMA62- Horizontal Finger Duct
ICCMSCMA62 Finger Ducts on Front & Rear, 2 RMS The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.
Price $ 52.26 Call For additional discounts (866) 650-DATA
Our
ICC Finger duct panels are compatible with most racks and wall mount brackets
and ICC's finger ducts are used for general purpose control panel wiring and to
route and protect wiring in communication closets. The non-slip cover conceals
all wiring and is easy to install. The duct and cover form a flush sidewall providing
increased capacity and improved aesthetics. Slotted ducts allow horizontally routed
cable and patch cords to be placed vertically to designated ports along the width
of the rack. Panels include a cover to conceal cables. Configurations are available
for front and front & rear cable management. Package includes 12-24 x 5/8
inch pilot point rack screws, for use with distribution racks.
ITEM NUMBER DESCRIPTION
MSCMA41 Finger Ducts
on Front, 1 RMS
MSCMA42 Finger Ducts on Front, 2 RMS
MSCMA61 Finger
Ducts on Front & Rear, 1 RMS
MSCMA62 Finger Ducts on Front & Rear,
2 RMS
RMS = Rack Mount Space, 1.75 Inches
Specifications
•
Made of rigid PVC
• UL Recognized continuous use temperature: 50 °C
(122°F)
• UL94 Flammability Rating of V-0
• Provided with
mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement
for flame retardant material
Features
& Benefits
• Wide finger/slot design provides greater sidewall
rigidity and can be used with a wide range of wire bundle sizes
• Rounded
edges protects hands and wiring/cabling from abrasion
• Non-slip cover
stays in place during shipment, vibration and when in vertical orientation, eliminating
rework
• Flush cover design holds 5% more wires than traditional duct
designs
• Double scoreline allows quick modification for larger cabling
bundles saving installation time leading to a lower installed cost
•
Specially formulated lead-free material eliminates health concerns associated
with PVC that contains lead
•
Restricted slot design retains wire in slot for fast, easy wire installation or
removal
Vertical Finger Duct- Vertical Cable Management Ducts
Part No.: ICCMSCMA12-
| PANEL, VERT FINGER DUCT, DBL, 35 H, 3X3 |
3x3 Dual Vertical Finger Duct Panel
|
ICC's Dual 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
Part No.: ICCMSCMA22-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's Dual 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.
| PANEL, VERT FINGER DUCT, DBL, 35 H, 4X5 |
| 4x5 Dual Vertical Finger Duct Panel |
Part No.: ICCMSCMA82-Vertical Fiber Duct- Vertical Cable Management Duct
| VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT) |
78" ht., 4"x5" slotted, front, center mount design |
ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.
Part No.: ICCMSCMA11-Vertical Fiber Duct- Vertical Cable Management Duct
| PANEL, VERTICAL FINGER DUCT, 35 , 3X3 |
3x3 Vertical Finger Duct Panel |
ICC's 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes ?easy to remove? covers to help facilitate installation.
Part No.: ICCMSCMA21-Vertical Fiber Duct- Vertical Cable Management Duct
ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.
| PANEL, VERTICAL FINGER DUCT, 35 , 4X5 |
| 4x5 Vertical Finger Duct Panel |
Home | Cables | Switches | Contact Us | Our Team | Locations
|
|
|
|
|
|
|
|
|
)
