Fiber Optic Telephone Extenders
American Data Supply carries a complete line of fiber optic telephone extenders ranging from simple "quick talk" extenders to multi-line (24 channel) PBX line extenders allowing you to use existing fiber optic cable to run your voice needs over 2 fiber strands or install fiber optic cable one time and use fiber optics for security proof voice, data, IP, video services on one media- fiber. The TC1900/1 "Quick-Talk" RS232 or Fiber Phone Extender extends dial-up phone service to remote sites over Async RS-232 or Fiber. Compatible with most PBXs or Key Systems, it provides 2-wire FXS on the telephone side with ring down capability and FXO on the PBX side.Quick-Talk is typically used to extend dial-up phone service to remote sites over a fiber optic (TC1901) or RS-232 circuit (TC1900). Other examples include extending a secured phone link to a remote site via an existing RS-232 or Fiber connection or setting up "hot links" via existing RS-232 links on satellite, fiber optic or microwave networks. When both sides are set to FXS, a "Hot Link" can be established.The TC1900/1 supports toll quality voice, asynchronous baud rates from 19.2K and bandwidths from 300Hz to 3.4Khz. Sixteen diagnostic LEDs and a Dry Contact for External Alarm and Ringer Connection are standard.
Our fiber optic modems are available from several different manufacturers including TC Comm, Opterna, Omnitron, Allied Telesyn, Opticomm, and others. Our Fiber Optic Transmission products are ideal for Data, Voice, Ethernet, T1/E1, T3/E3 & Audio for campus & intra-building fiber optic networks.
Telephone & Analog Multiplexers
Extend up to 28 telephone, data & analog channels to remote network sites with the TC8800 Fiber Optic Multiplexer. |
<
TC8000- Analog , Intercom & Data Multiplexer - TC8000
| Quick Talk RS-232 TC-1900 Fiber Telephone Extender- Prices Start at $1095 each
|
.jpg)
Quick Talk TC-1900 Fiber Optic Telephone Extender
Telephone fiber modem, telephone fiber converter, telephone to fiber multiplexer, telephone fiber mux, analog phone to fiber, POTS, 2-wire
"Quick-Talk"
RS-232 or Fiber Telephone Extenders
(Model TC1900/TC1901*) Prices Start at
$980.00 ea. 
Extend Telephone Link via Fiber or
Async RS-232
Async Baud Rate From 19.2Kbps
16 LEDs/4 DIP Switches for
Diagnostics
PBX and Key System Compatible, FXO/FXS Selectable
Voice
Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
Built-In Dry Contact
Relay for External Alarm and Ringer Connection
12VDC, Optional 24VDC, or
115/230VAC with Power Adapter
Applications
The TC1900/1901 is often used to extend telephone service in campus networks,
power plants, substations, etc or use an existing service data channel to set
up a telephone link. It is also used to set up "Hot Links" telephone
service via existing RS-232 links on satellite, fiber optic or microwave networks.
Other applications include using the inherent benefits of fiber optics to reduce
noise/EMI or maximize security/isolation.
Applications
The TC1900/1901 is often used to extend telephone service in campus networks,
power plants, substations, etc or use an existing service data channel to set
up a telephone link. It is also used to set up "Hot Links" telephone
service via existing RS-232 links on satellite, fiber optic or microwave networks.
Other applications include using the inherent benefits of fiber optics to reduce
noise/EMI or maximize security/isolation.
Description
The TC1900/1901 "Quick-Talk" Phone Extender can turn a fiber optic network or RS-232 circuit into a voice network simply by plugging a telephone set into an RJ-11 connector. It is compatible with most PBXs or Key Systems.
Quick-Talk is typically used to extend dial-up phone service to remote sites over a fiber optic (TC1901) or RS-232 circuit (TC1900). For example, a user can extend a secured phone link to a remote site via an existing satellite or microwave RS-232 data connection. With the optional fiber optic front end, Quick-Talk can extend a phone line up to 20 miles away.
Quick-Talk provides 2-wire FXS (foreign exchange subscriber) on the telephone side with ring down capability and FXO (foreign exchange office) on the PBX side. When both sides are set to FXS, a "Hot Link" can be established; when one side lifts up the handset, the other side starts ringing.
Available in standalone (TC1900S) or rackmount (TC1900R) versions, it is compatible with all popular types and sizes of fiber optic cable. Diagnostic aids include 16 diagnostic LEDs for indicating power, ring, FXS, FXO, and audio activity. The TC1900R PC Card version fits into TCRM191 and TCRM195 rackmount card cages.
Quick-Talk is available with RS-232 or optical interfaces. The optical interface is available in multimode (850/1300nm) or single mode (1300/1550nm) versions, with ST, FC or SC connectors. A local dry contact relay is also provided for external alarm and ringer connection.
Power
is 12VDC or 115/230VAC with an external power cube. 24VDC is optional. Power redundancy
is standard. Electrical connectors are RJ-11 Female for both the telephone set
& RS-232 connections.
*For ordering purposes, the TC1900 is the RS-232
version. TC1901 is the fiber version.
Order Today-Call (866) FIBER-21
| TC1910 Fiber Optic Telephone Extender--Prices Start at $995.00
|
.jpg)
TC1910 Fiber Optic Telephone Extender
Extends
Telephone Link via 10 Base-T Ethernet Connection
Connects to Full Duplex Devices:
Switches, Routers, Bridges, Transceivers, etc.
Automatic Power-Up, Recovery
Connection
Web-Based Configuration Interface
PBX & Key System (POTS)
Compatible, FXO/FXS
Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality
Sound
18 LEDs for Diagnostics & Status Monitoring
Built-in Dry Contact
Relay for External Alarm and Ringer Connection
12VDC, Optional 24VDC or 115/230VAC
with Power Adapter
Description
The TC1910 Ethernet Telephone Extender enables telephone service over a LAN via 10Base-T Ethernet connections. It has a built-in Codec that digitizes voice and converts to packets for transmission between local and remote TC1910s with designated IP addresses. It is compatible with PBX and Key Systems (POTS).
LAN connections can be made by most types of Full Duplex Ethernet devices, including switches, routers, bridges, transceivers, etc. A Web-based Configuration user interface (most browsers including Microsoft Windows Explorer, etc.) is provided to view network settings or change IP addresses from the factory default.
Phone connection is automatic upon power-up or when network interruption is restored. Depending on network traffic, multiple pairs of TC1910s can be used to set up individual point-to-point telephone links. A hardened temperature version (-20° to 70°C), Model TC1910T, is available for harsh environments.
The TC1910 provides Toll Quality sound within voice bandwidths from 300Hz to 3.4KHz. Two types of voice applications are supported: one, connecting to a PBX for outside telephone service; two, setting up a "hot link" point-to-point connection, e.g. between two work stations, within a LAN. Two-wire FXS (foreign exchange subscriber) is provided on the telephone side with ring down capability and FXO (foreign exchange office) on the PBX side.
Eighteen LEDs for network status, phone status, power and volume are provided to enhance status monitoring and diagnostics. Dry contacts for external alarm and ringer are standard.
The TC1910 is available
in standalone (TC1910S) or rackmount (TC1910R) versions. The rackmount versions
fit into TCRM191 or TCRM195 19" Rackmount Card Cages. Power is 12VDC or 115/230VAC
with an external power cube. 24VDC power is optional. Power redundancy is standard.
Phone connectors are RJ-11 Female and 10Base-T connectors are RJ-45 Female
appdiagram.gif)
Call Us Today Tollfree At (866) 342-3721 or (866) 650-DATA
Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives
appdiagram.gif)