Breakout Fiber Optic Cable- Breakout Fiber Cable-Breakout Fiber Optic Cables
Plenum Innerduct Is Your One Source For All Your Fiber Optic Cable-Data-Fiber Optic Termination Kits
BREAKOUT FIBER CABLE
Draka's ezBREAKOUT cables package up to 24 individually jacketed breakout units with 900µm tight buffered fibers into a single flame-retardant cable - riser, plenum, or LSZH (Low-Smoke, Zero-Halogen) rated. This design provides simple direct field termination with strain relief.
Draka’s ezBREAKOUTTM cables package up to 24 breakout units
with 900 μm tight buffered fibers into a single flame-retardant
cable – riser, plenum, or LSZH (Low-Smoke, Zero-Halogen) rated.
This design provides simple direct field termination with strain
relief.
Features & Benefits
Easy Cable Installation & Termination
2.5mm units with 900 μm tight buffered fibers provide
simple direct field termination
Flexible robust cables simplify pulling and placement
Numbered sub-units simplify identification and routing
Optional Interlock Armor provides robust protection &
one-step installation
Flame-Retardant Safety
Versions for Riser (OFNR/FT-4), Plenum (OFNP/FT-6) & LSZH
A single cable design can support all structured cabling
applications
Reliable Performance
Broad mix & match selection of Singlemode / Multimode
(50 μm, 62.5 μm, MaxCap®, HiCap) fiber types
Guaranteed 10 Gigabit & 1 Gigabit Ethernet transmission
lengths
Guaranteed standards-based performance
Available in 62.5 μm, 50 μm, single-mode & hybrid versions
Plenum Innerduct Carries AFL Tight Buffered Fiber Cables, Indoor Outdoor Fiber Cables, Simplex Fiber Optic Cable,Breakout Fiber Cable, Plenum Indoor Outdoor Cable,Indoor fiber Cable, Loose Tube Fiber Optic CableCall (866) FIBER-21
Type Of Fiber Optic Cable |
Description Of Fiber Optic Cable |
Fiber Optic Cable Applications |
FTTX- Fiber To The Home Cable |
|
Fiber To The Home Applications |
Singlemode Fiber Optic Cable |
|
Long Haul- DWDM-CO Trunking |
Multimode Fiber Optic Cable |
|
WAN/LAN- Indoor-riser |
Indoor-Outdoor Fiber Optic Cable |
|
Used Both Indoor and Outdoor |
Tight Buffer Fiber Optic Cable |
|
Indoor Cabling-Riser-Horizotnal |
Loose Tube Fiber Optic Cable |
|
Direct Bury- Large Count Feeder Data Cable |
Breakout Fiber Optic Cable |
|
Breakout cables combine multiple flexibility with the strength of individually jacketed fibers |
Zipcord Fiber Optic Cable |
|
Zip cord usually used in indoor applications, especially on fiber optic patch cable |
Composite Fiber Optic Cable |
|
Composite cable for use in indoor/outdoor applications -has a fiber optic core section |
Ribbon Fiber Optic Cable |
|
Manufacturing- Used In Board or Electronic Applications |
Armored Fiber Optic Cable |
|
Military- Rugged Applications |
Aerial Fiber Optic Cable |
|
Utility- Main Communications Distribution |
Current List Of Local Fiber Cable Stock |
|
|
Plenum Innerduct Carries
AFL Telecommunications's Premise Cable,Tight Buffered Fiber Cables, Indoor Outdoor Fiber Cables, Simplex Fiber Optic Cable,Breakout Fiber Cable, Plenum Indoor Outdoor Cable,Indoor fiber Cable, and Loose Tube Fiber Optic Cable
AFL Telecommunications has leveraged its years of fiber optic cabling experience in developing its full line of premise tight-buffered cables for voice, video and data needs. Our premise cables have been successfully incorporated in all applications from Central Office and LAN/WAN, to CATV hub sites, government and military applications, and high-speed data storage facilities.
Armored Tight Buffered CPC Cables- Armored Tight Buffered Cable
Armored Tight-Buffered fiber optic CPC Cables incorporate 4 to 144 fiber count CPC cables in a UL listed, jacketed, aluminum interlocking armor. Jacketed aluminum interlocking armor provides the best balance of ruggedness, flexibility, and low weight. UL listed armored cables with no outer jacket and UL listed armored cables with steel interlocking armor are also available.
Features:
-
Superior crush resistance
-
Interlocking Armor
-
Eliminates need for separate installation of innerduct or conduit.
-
Heavy duty construction
-
Suitable for harsh industrial environments
Application:
- Routing inside of buildings where additional ruggedness is required or where increased rodent resistance is required Extra protection for fiber optic cables in harsh industrial environments
- Manufacturing plants
Breakout
Cable- Breakout Cable
Breakout cables combine multiple fiber flexibility with the strength of individually jacketed fibers. Breakout cables from AFL Telecommunications can be terminated for fanout assemblies.
Application:
- Rugged multi-fiber cross-connects Intrabuilding “backbone” Fiber “backbone” to communications closet Riser subunits 2.4mm
- Plenum subunits 3.0mm
Indoor/Outdoor
Plenum Tight Buffered Cable
Indoor/Outdoor Tight-Buffered Cables are specified for campus network cabling between buildings where inter-building lengths are short enough that the installer can recognize savings from the lower costs of terminating tight-buffered cables. For longer inter-building runs, consider AFL’s Indoor/Outdoor Riser Loose Tube Cables. For indoor applications, cables can be either UL910 (OFNP) or UL 1666 (OFNR) listed.
Features:
- Cables are water blocked and meet water penetration requirements of GR-20-CORE Outer jacket is moisture-resistant, fungus-resistant and UV resistant for outdoor use
- With a plenum rating, this cable can be used in all environments: plenum, riser, general inside plant, outside plant
Indoor/Outdoor
Riser Tight Buffered Cable
Indoor/Outdoor Tight-Buffered Cables are specified for campus network cabling between buildings where interbuilding lengths are short enough that the installer can recognize savings from the lower costs of terminating tight-buffered cables. For longer inter-building runs, consider AFL’s Indoor/Outdoor Riser Loose Tube Cables. For indoor applications, cables can be either UL910 (OFNP) or UL 1666 (OFNR) listed.
Features:
- Cables are water blocked and meet water penetration requirements of GR-20-CORE Outer jacket is moisture-resistant, fungus-resistant and UV resistant for outdoor use
- With a plenum rating, this cable can be used in all environments: riser, general inside plant, outside plant
Multi-Unit Circular Premise Cable
Multi-unit Circular Premise Cables allow for use in applications requiring fiber counts between 24 and 144 fibers. Unitized construction allows for ease of fiber identification and rapid installation.
Application:
- Head-end termination to a fiber backbone Termination of fiber rack systems Multi-floor deployment where select fibers are used at each floor
- Intra-building backbones
QUAD-Link & Circular Premise Cable
QUAD-Link and single unit Circular Premise Cable designs allow for excellent packaging density, flexibility, and ease of routing. Buffered to 900 µm, these cables can be directly terminated into connectors in loaded panels or in communications closets.
Features:
- Connectorized communications cables with both send-and-receive and send-and-receive backup in a single unit Intrabuilding backbones
- Routing between communications closets and equipment rooms
RIBBON-Link
Cable
RIBBON-Link® cables combine high fiber density in a small diameter, flexible package. These cables can be terminated with 12 or 24 fiber multi-fiber connectors or the fibers can be fanned out and terminated individually. Plenum, Riser and LSZH options are all UL listed.
Features:
- Fiber counts up to 48 with unitized, zip configuration construction Maximum of two 12-fiber ribbons per unit Skew matched ribbons available (<10,<6,<5,<4,<3,<2,<1.2 ps/meter) Easy interface to MT and MTP based connectors as well as today’s newest ribbon connectors (12 or 24 fiber ferrules)
- Ruggedized versions with additional jacketing are available
Application:
- Direct interface to computers with the use of “back-plane” style fiber connectors High-density interconnection to wall outlets or patch panels with ribbon connector interfaces “Micro-diameter” fanout cables utilizing standard industry fiber connectors (ST®, SC, FC, LC, MT-RJ)
- VSR OC-192/OC-768 Interface based on parallel fiber optics
Simplex Cable
Simplex fiber optic cables provide the strength and flexibility required for today’s fiber-interconnect applications. AFL offers the broadest selection of simplex cordage including plenum, riser and LSZH, available in all diameters. Our simplex cable is tested to meet Telcordia GR-326 when used in connectorized assemblies.
Application:
- Fiber patch panels within communications closets
- Links between electronic equipment and fiber patch panels
- Connectorized patch cords for cross connect applications
Zipcord
& DUAL-Link Cable
Zipcord and DUAL-Link cables are available to provide links to the future for such protocols as FDDI, 10 Gigabit Ethernet, ATM, and Fibre Channel. Connections are easy to terminate with this flexible, two-fiber design. AFL Telecommunications offers the broadest selection of duplex cordage including Plenum, Riser and LSZH in all diameters. LSZH jacketed cables are OFNR listed. This design provides one cable for companies that don’t want to maintain multiple cable types for varying global standards.
Features:
- Jacket stiffness and flexibility
- Diameter
- Print legend
- Jacket color
- Tight Buffer strippability (easy strip option allows removal of up to 1 meter of 900µm material without stripping the fiber’s 250µm coating)
- Ruggedized Duplex designs for transport from the communications closet to wall outlet
Application:
- Communications closet to wall outlet
- Wall outlet to desk
- Connectorized patchcords for interconnect and cross-connect applications
- Easy interface to ESCON®, FDDI, and various other duplex connectors
. Plenum Innerduct Carries the entire lineADSS Aerial Cable, ADSS Fiber Cable, AFL Telecommunications ADSS Cable, All- Dielectric Self- Supporting Cable, All Dielectric Self Supporting Cable,AFL ADSS Cable, Fiber Optic Cable. AFL Telecommunications' full line of All-Dielectric Self-Supporting Aerial (ADSS) Cables meet the demanding needs of transmission and distribution environments. This high-capacity cable offers great flexibility for placement on overhead transmission towers, eliminating the need for a support messenger. ADSS cables feature fiber counts up to 576, a dry core design and the high-tension strength capability required for installation in the toughest environmental and electrical conditions. Unaffected by electromagnetic fields, our ADSS cables can be installed and maintained on extra high-voltage power lines without interruption of power service to customers.
-
Sprint PID's
1*Reel Cleaner Cassette P/N NOSKCRC-0000087073
2* KleanCore Reel P/N NOSFCRR-0000087074
3* FiberSwiper PN FIBERSWIPER-0000087076
4* Keancore Cletop Replacement Reel-P/N NOSCLERR-0000087075
5* Fiberswiper Replacement Cards-P/N-FIBERSWIPER-RC6-0000087077
6* EZ Field Termination Kit -P/N EZFK-KITSC-0000097951
7* SC/UPC EZFM Connector Kit P/N EZFM-R50SCUKIT-0000097953
8* SC/APC EZFM Connector Kit P/N EZFM-R50SCAKIT-0000097952
|
SBC PID's
FIBERSWIPER 400166898
FIBERSWIPER Replacement Cards 400166898
|
Additional Links ------
We’re here to help you solve your business challenges and increase your ability to meet your own customers’ growing expectations from their telecommunications service providers.
Fiber
Termination Kits 
Fiber Fusion Splicers
Plenum Innerduct will NOT BE UNDERSOLD
Lowest
Priced Corning- Emerson-Aloca Fiber Cable-Jumpers in
the USA!
