Aerial Cable Installation- Aerial Cable Retrofit- Aerial Fiber Optic Cable Installs-Loose Tube Armored Cable-Dielectric Self Supporting Cable-AFL ADSS Cable-Loose Tube Fiber Optic Cable-Loose Tube Fiber Optic Cable
Plenum Innerduct Is Your One Source For All Your Fiber Optic Cable-Data-Fiber Optic Termination Kits
.
Plenum Innerduct Carries AFL Loose Tube Armored and Loose Tube Non- Armored Cable- Call (866) FIBER-21
AFLSkywrap
Plenum Innerduct Carries the entire line of
AFL Loose Tube Fiber Optic Cables
Plenum Innerduct carries the entire line of AFL Loose Tube Fiber Cable, Aerial Loose Tube Fiber Cable, Direct Bury Loose Tube Fiber Cable, Loose Tube Armored Cable, Dielectric Self Supporting Cable,AFL ADSS Cable, and Loose Tube Fiber Optic Cable. AFL Telecommunications offers a high-quality line of loose tube cables for lashed aerial, duct and direct buried applications. Our loose tube designs include a wide range of optical fiber types - low attenuation, superior geometry single-mode fibers such as SMF-28e™ fiber; market-leading non-zero dispersion fibers including LEAF® fiber; and multimode fibers certified for laser launch and optimized for gigabit Ethernet applications. Our expert product engineering team can custom design your system with higher pulling tensions, special jacketing, or smaller diameters to fit your applications.
SkyWrap
The SkyWrap™ system was designed as the first "fiber optic retrofit" system developed especially for power utilities. It allows a utility to add a fiber optic communications link to existing overhead transmission and distribution lines. Using a remote-controlled tug that pulls a wrapping device, the small diameter fiber optic SkyWrap cable -- immune to electrical interference from the power line -- is helically wrapped around an existing ground wire or phase conductor.
SkyWrap
Installed worldwide since 1982, SkyWrap® fiber optic cable is helically applied on ground wires or phase conductors. A specially designed spinning machine is used to wrap the cable under controlled conditions. This system offers a complete communication link designed and engineered for high-voltage environments at low cost. SkyWrap is the ideal solution when access to the overhead line is problematic. With SkyWrap there’s no need to de-energize the line. The cable can be wrapped on the ground wire under live-line conditions.
Features:
- Quick, cost-effective installation
- Lightweight, easy to handle
- Low capital costs
- Low lifetime support costs
- Qualified by leading utilities, e.g. NGC (UK) and EDF (France)
- Toughened cables can handle the most adverse environmental conditions
- High fiber counts
- Uses existing power line infrastructure
- Can incorporate G652 and G655 fiber technologies
Application:
- Overhead electric power lines
- Retro-fit along ground or phase wires
Non-Armored UNIFLEX
Our Non-Armored UNIFLEX® cable is a central tube, loose tube product used in various outside plant applications. Its compact design holds up to 12 fibers.
Temperature Range:
Operating -40 ºC to +70 ºC
Storage -40 ºC to +75 ºC
Installation 0 ºC to +70 ºC
Application:
Armored UNIFLEX
Our Armored UNIFLEX® cable is a central tube, loose tube product used in various outside plant applications. Its compact design holds up to 12 fibers.
Temperature Range:
Operating -40 ºC to +70 ºC
Storage -40 ºC to +75 ºC
Installation 0 ºC to +70 ºC
Application:
- Service (Drop) Cables Building Interconnections (Campus LAN) Connectorized Trunking Cables Distant Learning
- Distribution
Indoor/Outdoor UNIFLEX
Single tube products allow for installations that require a high degree of flexibility combined with a small cable diameter. AFL Telecommunications has designed a cable that has all the characteristics of stranded loose tube cables from a mechanical and environmental standpoint, combined with the high flexibility and small diameter requirements of real-world installations. This cable is the ultimate solution for flexible, connectorized applications, as well as crowded ducts in existing fiber applications, and can be lashed to an aerial messenger. Our Indoor/Outdoor UNIFLEX® cable not only services the outside plant environment, but also qualifies as an Indoor/Outdoor cable, allowing potential cost savings with fewer splice points. This product complies with EIA/TIA standards and is ETL listed for OFNR use.
Temperature Range:
Operating -40 ºC to +70 ºC
Storage -40 ºC to +75 ºC
Installation 0 ºC to +70 ºC
Application:
- No Service (Drop) Cables
- Building Interconnections (Campus LAN)
- Connectorized Trunking Cables
- Distance Learning
- Distribution
LSZH Loose Tube CableLSZH Loose Tube Cable
AFL’s Low Smoke Zero Halogen (LSZH) Loose Tube cable is free of any Halogen material, yet is strong enough to withstand the harsh environment of the outdoors. In addition, the cable is blocked to prevent the axial flow of moisture. Optical fibers are located within buffer tubes to achieve stable and reliable performance in any installation.
AFL’s LSZH cable is offered in two configurations. The Uniflex® design features a single buffer tube to provide the most economical solution where 12 or fewer fibers are required. The Stranded Loose Tube design is comprised of multiple buffer tubes for applications where up to 144 fibers are required.
Heavy Duty UNIFLEX
Heavy Duty UNIFLEX
Our Heavy Duty UNIFLEX® loose tube cable features a central tube design and thicker-walled jacket. Often used in connectorized cable assemblies, it holds up to 12 fibers.
Temperature Range:
Operating -40 ºC to +70 ºC
Storage -40 ºC to +75 ºC
Installation 0 ºC to +70 ºC
Application:
Indoor/Outdoor Stranded Design
Indoor/outdoor stranded loose tube combines the robust mechanical and environmental characteristics of an outside plant cable with the flexibility of an inside plant riser cable. Indoor/outdoor stranded loose tube is routed directly from the outside plant to telecommunications closets or main distribution frames through the riser of a building, eliminating costly splice locations and the “50-foot rule.” Indoor/Outdoor Stranded Design loose tube cable is moisture and U.V. resistant, S-Z stranded for easy mid-span access, UL-listed type OFNR (UL1666) riser rated, and can be used in both duct and lashed applications.
Temperature Range:
Operating -40 ºC to +70 ºC
Storage -40 ºC to +75 ºC
Installation 0 ºC to +70 ºC
Application:
- Long Haul Networking
- Building Interconnections (Campus LAN) Trunking Lines Direct to Telecommunications Closet Local Loop Distant Learning Distribution
- Intrabuilding Backbones
A
Stranded Design (Armored) Armored Loose Tube Cable
Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high speed network. AFL’s Armored Loose Tube Single Jacket/Single Armor fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations, including direct buried. Our stranded design cables feature fiber counts up to 144, compliance with EIA/TIA and REA/RUS PE-90, and are S-Z stranded for easy mid-span access. Industry standard designs combined with innovative technologies, such as a dry core product, yield a world class cable that will support today’s and tomorrow’s technological needs.
AFL's Stranded Design (Armored) cables are RUS listed. For a complete listing of all AFL RUS listed products please download this PDF catalog RUSlistedProdCat.pdf.
Temperature Range:
Operating -40 ºC to +70 ºC
Storage -40 ºC to +75 ºC
Installation -30 ºC to +70 ºC
Application:
- Long Haul Networking
- Building Interconnections (Campus LAN) Trunking Local Loop Feeder Distant Learning
- Distribution
Stranded Design (Duct) Armored Loose Tube Fiber Optic Cable
Acting as the backbone for most of today’s fiber based systems, stranded fiber optic cables play a critical role in the high-speed network. AFL’s Stranded Loose Tube fiber optic cables are designed to provide high fiber counts with the flexibility and versatility required for today’s most demanding installations. Our Stranded Design cables feature fiber counts up to 576, compliance with EIA/TIA and REA/RUS PE-90, and are S-Z stranded for easy mid-span access. Industry standard designs combined with innovative technologies, such as a dry core product, yield a world-class cable that will support today’s and tomorrow’s technological needs.
AFL's Stranded Design (Duct) cables are RUS listed. For a complete listing of all AFL RUS listed products please download this PDF catalog RUSlistedProdCat.pdf.
Temperature Range:
Operating -40 ºC to +70 ºC
Storage -40 ºC to +75 ºC
Installation -30 ºC to +70 ºC
Application:
- Long Haul Networking
- Building Interconnections (Campus LAN) Trunking Local Loop Feeder Distant Learning
- Distribution
. Plenum Innerduct Carries the entire lineADSS Aerial Cable, ADSS Fiber Cable, AFL ADSS Cable, All- Dielectric Self- Supporting Cable, All Dielectric Self Supporting Cable,AFL ADSS Cable, Fiber Optic Cable. AFL Telecommunications' full line of All-Dielectric Self-Supporting Aerial (ADSS) Cables meet the demanding needs of transmission and distribution environments. This high-capacity cable offers great flexibility for placement on overhead transmission towers, eliminating the need for a support messenger. ADSS cables feature fiber counts up to 576, a dry core design and the high-tension strength capability required for installation in the toughest environmental and electrical conditions. Unaffected by electromagnetic fields, our ADSS cables can be installed and maintained on extra high-voltage power lines without interruption of power service to customers.
-
Sprint PID's
1*Reel Cleaner Cassette P/N NOSKCRC-0000087073
2* KleanCore Reel P/N NOSFCRR-0000087074
3* FiberSwiper PN FIBERSWIPER-0000087076
4* Keancore Cletop Replacement Reel-P/N NOSCLERR-0000087075
5* Fiberswiper Replacement Cards-P/N-FIBERSWIPER-RC6-0000087077
6* EZ Field Termination Kit -P/N EZFK-KITSC-0000097951
7* SC/UPC EZFM Connector Kit P/N EZFM-R50SCUKIT-0000097953
8* SC/APC EZFM Connector Kit P/N EZFM-R50SCAKIT-0000097952
|
SBC PID's
FIBERSWIPER 400166898
FIBERSWIPER Replacement Cards 400166898
|
Additional Links ------
Were here to help you solve your business challenges and increase your ability to meet your own customers growing expectations from their telecommunications service providers.
Fiber Termination Kits Fiber Fusion Splicers