AFL Complete Product Line Fiber Optic Catalogue-Click Here For PDF

Each LL-400b enclosure features a scratch resistant powder coated aluminum base and a fully gasketed cover. A unique self-sizing grommet design allows for express and preterminated cable installation.
The LL-400 Series family of Fiber Optic Splicing and Distribuiton Enclosures provides for organizing, splicing, and interconnecting fibers in broadband, distribution, and building entrance applications. Each LL-400b enclosure features a scratch resistant powder coated aluminum base and a fully gasketed cover. A unique self-sizing grommet design allows for express and preterminated cable installation. The LL-400b is a butt-style enclosure equipped with 6 independent cable entry/exit grommets, used for outdoor pedestal or indoor building entrance and riser splicing applications. The unit supports a maximum storage and splicing capacity of up to 240 single or 288 mass-fused fibers.

When installed into an LL-400b, the Inteconnect Module supports the interconnection of up to 24 SC optical bulkheads. It is used in outdoor pedestals or building mounted LL-400b enclosures where interconnection is required.

Features:

•	NEMA 3 rated enclosure
•	Independent cable strain relief system
•	Cable entry/exit grommet seals
•	Fiber routing system
•	Splice tray support system
•	Hinged cover
•	Supports optional Interconnect Modules
•	Interconnect Module supports up to 12 SC bulkhead adapters
•	Accomodates “Field Couplers” with optional Splitter housing Attachment (P/N 91944-00)
•	Secured with a standard padlock
•	4 cable ports with standard grommets
•	8 cable ports with optional expansion kits

West Coast (866) FIBER-21 --(866) 342-3721- East Coast (866) 650-3282

Plenum Innerduct Carries A Complete Range Of Fiber Optical Enclosures-Fiber Distribution Enclosures-Optical Entrance Enclosures

AFL-LL-400b Optical Splicing Enclosures	AFL-LL-400b Pedestal Optical Splicing Enclosures	AFL-LL-500b Optical Splicing & Distribution Enclosures	AFL- Optical Entrance Enclosures	ICC Fiber Optic Enclosures	Lan Racks	Outside Plant Fiber Enclosures Click Here

36 Port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Patch Panel Part No. ATSRAC-1X- Price $87.00
Dimensions: Width = 17'', Depth = 12'', Height = 1.75''
Weight (unloaded): 10.3 lbs.
Port Capacity: 6-36
Features: 1U rackmount can be loaded with up to 3 panels with 6 to 36 port capacity. Reversible mounting bracket for 19'' or 23'' racks. 16-gauge steel with black powder finish coat. Steel door at front and at rear with ¼ turn latches. Top lid removable at both front and rear. Cable management spools in the rear of the enclosure and cable management rings to the front for jumper management. Sliding tray for access to both front and rear. Large entry points at front for easy jumper management, as well as "D" shaped cutouts at rear for access of backbone cable. Accessory pack included with additional cable management, label holders and screws for securing to rack and top panels. Labeling kit included for clear and precise identification of ports.
Lead time: In Stock, Immediate Shipment

 

24 port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Optic Patch Panel Part No. ATSRAC-12X-Price $96.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-24
Features: 2U rackmount can be loaded with 2 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

48 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATSRAC-24X- Price $100.50
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-48
Features: 2U rackmount can be loaded with 4 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

72 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. Plenum Innerduct RAC-2X- Price $105.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-72
Features: 2U rackmount can be loaded with 6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Sliding tray for high-density situations. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

144 Port Rack Mount Enclosure- Rack Mount Fiber Patch PanelPart No. RAC-4X Price- $173.25
Dimensions: Width = 17'', Depth = 12'', Height = 7''
Weight (unloaded): 11.5 lbs.
Port Capacity: 6-144
Features: 4U enclosure can be loaded with 12 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extensions for 23'' racks. 16-gauge steel with corrosion-resistant black powder finish coat.
Lead time: In Stock, Immediate Shipment

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. Plenum Innerduct WAC-1X
Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
Weight (unloaded): 2.1 lbs.
Features: Fiber Optic Wall Mount Enclosure- Pact Panel.Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

------------------------------------

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-2X
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-4X
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-8X
Dimensions: Width = 17'', Depth = 5.87'', Height = 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

144 Port Fiber Optic Enclosure- Fiber Optic Patch Panel

Part No. ATSWAC-12X-H-06-144- Same as ATSWAC-8X- but can accomodate 144 fibers. You can now load up the 144 Count Fiber Patch Panel with SC-ST- or whatever combination adapters you need. Ideal for tying in large count fiber cable from the "street" and using this panel as a distribution panel- leading into the building network.

--------

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-2X
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-4X
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-8X
Dimensions: Width = 17'', Depth = 5.87'', Height = 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

144 Port Fiber Optic Enclosure- Fiber Optic Patch Panel

Part No. ATSWAC-12X-H-06-144- Same as ATSWAC-8X- but can accomodate 144 fibers. You can now load up the 144 Count Fiber Patch Panel with SC-ST- or whatever combination adapters you need. Ideal for tying in large count fiber cable from the "street" and using this panel as a distribution panel- leading into the building network.

Plenum Innerduct "Six" Packs

Available are Plenum Innerduct adapter panels with pigtails for splicing.  This kit includes 1, 6, or 8 pack loaded adapter panel with pigtails.  Connector styles are indicated and standard length of pigtails are 3 meters.  Pigtails are TIA-568-A color coded.  Contact your Plenum Innerduct sales associate at 1-866-342-3721 for custom adapter/pigtail kits.

Singlemode Six Pack Kits - 3 meters

• ATSP6SCSM - (1) SC SM 6 pack with 6 SC/UPC pigtails
• ATSP6FCSM - (1) FC SM 6 pack with 6 FC/UPC pigtails
• ATSP6STSM - (1) ST SM 6 pack with 6 ST/UPC pigtails
• ATSP8SCSM - (1) SC SM 8 pack with 8 SC/UPC pigtails
• ATSP6DSCSM - (1) Duplex SC SM 6 pack with 12 SC/UPC pigtails

Multimode Six Pack Kits - 3 meters

• ATSP6SCMM  - (1) SC MM 6 pack with 6 SC pigtails
• ATSP8SCMM - (1) SC MM 8 pack with 8 eight SC pigtails
• ATSP6STMM - (1) ST MM 6 pack with 6 ST pigtails

ATSP6SCSM-1-SC Duplex Singlemode 6 Pack with 12-SC/UPC Pigtails Price$ 160.00

ATS-P6STSM-1-SC Multimode 6 Pack with 6-SC/UPC Pigtails Price $ 50.00

ATSP8SCSM-1-SC Singlemode 6 Pack with 6-SC/UPC Pigtails Price $ 81.00

ATSP6SCMM-1-ST Multimode 6 Pack with 6-ST/PC Pigtails $ 47.00

ATSP8SCMM-1-ST Singlemode 6 Pack with 6-ST/UPC Pigtails Price $ 82.00

ATSP6STMM-1-SC Singlemode 8 Pack with 8-SC/UPC Pigtails Price $ 99.00

Plenum Innerduct Snap Six- Packs For Distribution Frames

These pre-terminated adapter panels provide convenience to technicians splicing into fiber distribution frames.  Available in 6 or 12 fiber bundles with TIA-598-A standard color code, these bundled fibers provide cable management from patchpanel to splice bays. Standard 3 meters. Contact ATSat 1-866-342-3721 for custom lengths and different connector style adapter panels

Singlemode Six Pack- Eight Pack Kits - 3 meters

• ATSC6LSSP - (6) adapters, SC/UPC, 6 fiber pigtail, SM, 3 meters
• ATSSC6LSSP - (6) duplex adapters, SC/UPC, 12 fiber pigtail, SM, 3 meters
• ATSC6APCSP - (6) adapters, SC/APC, 6 fiber pigtail, SM, 3 meters
• ATSC6DLSP - (6) duplex adapters, LC/UPC, 12 fiber pigtail, SM, 3 meters
• ATST6LSSP - (6) duplex adapters, ST, 12 fiber pigtail, SM, 3 meters

• Multimode Six Pack- 8 Pack Kits - 3 meters
• ATSC6LMSP - (6) duplex adapters, SC, 12 fiber pigtail, MM, 3 meters
• ATSP6STMM - (1) ST MM 6 pack with 6 ST pigtails

PRICING:

ATSC6LSSP - 1 SC Duplex Singlemode 6 Pack with 12-SC/UPC Pigtails Price $ 190.70 each

ATSC6APCSP - 1 SC Singlemode 6 Pack with SC/APC Pigtails Price $ 95.50 each

ATSC6DLSP - 1-LC Duplex Singlemode 6 Pack with 12-LC/APC Pigtails Price $ 190.70 each

ATSP6SCMM-1-ST Multimode 6 Pack with 6-ST/PC Pigtails $ 47.00

ATST6LSSP-1ST Multimode 6 Pack with 6 ST/PC Pigtails$ 86.00 each

ATST6LSMP -1 -ST Multimode 6 Pack with 6 ST/PC Pigtails Price $ 58.00 each

Pricing For Six Pack-8 Pack Plates For Wall & Rack Mount Fiber Optic Enclosures

Fiber Optic Enclosure Pricing For Enclosures Above

	Fiber Optic EnclosuresFiber Optic Patch Panels
ATSRAC-1X	Rack Mount 1U Patch Panel up to 36 Ports	$87.00
ATSRAC-12X	Rack Mount 2U Patch Panel up to 24 Ports	$96.00
ATSRAC-24X	Rack Mount 2U Patch Panel up to 48 Ports	$100.50
ATSRAC-2X	Rack Mount 2U Patch Panel up to 72 Ports	$105.00
ATSRAC-4X	Rack Mount 2U Patch Panel up to 144 Ports	$173.25
ATSWAC-2X	Wall Mount patch panel up to 24 ports	$37.49
ATSWAC-4X	Wall Mount patch panel up to 48 ports	$56.25
ATSWAC-8X	Wall Mount patch panel up to 96 ports	$122.63
ATSAP-106ST	6 Pack ST PB Insert MM/SM Adapter Panel	$10.43
ATSAP-108ST	8 Pack ST PB Insert MM/SM Adapter Panel	$14.93
ATSAP-112ST	12 Pack ST PB Insert MM/SM Adapter Panel	$24.00
ATSAP-106SC	6 Pack SC PB Insert MM/SM Adapter Panel	$13.43
ATSAP-108SC	8 Pack SC PB Insert MM/SM Adapter Panel	$24.00
ATSAP-104DSC	4 Pack Duplex SC PB Insert MM/SM Adapter Panel	$24.00
ATSAP-106DSC	6 Pack Duplex SC PB Insert MM/SM Adapter Panel	$30.00
ATSAP-106MTRJ	6 Pack MTRJ (12 fibers) Mating Sleeve MM/SM Adapter Panel	$24.00
ATSAP-112MTRJ	12 Pack MTRJ (24 fibers) Mating Sleeve MM/SM Adapter Panel	$45.00
ATSAP-106LC	6 Pack LC PB Insert adapter panel	$36.00
ATSAP-106FC	6 Pack FC PB Insert adapter panel	$24.00
ATSAP-108FC	8 Pack FC PB Insert adapter panel	$33.00
ATSAP-112FC	12 Pack FC PB Insert adapter panel	$39.00
ATSRAC-1X	Wall Mount patch panel up to 24 ports	$42.90

AFL Telecommunications Fiber Closures

Splice Closures are designed to simplify splice management. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures can be installed without the need for special tools, heat, adhesives, drills, or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant. Closures are designed and tested to Telcordia™ GR-771 requirements and Rural Utilities Service (RUS) listed.he AFL family of Aerial Weathertight Splice Closures is designed to provide a cost-effective solution for your aerial splicing needs. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures can be installed without the need for special tools, heat, adhesives, drills, or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant.

* LG-410
* LG-420
* LG-500
* LG-600

Features:

* Individual, patented, self-sizing cable grommets and strength member tie downs provide for cable additions without disturbing those previously installed
* Unique tongue-in-groove closure seal and back-to-back grommet design provides for a weathertight and insect seal
* Easy to maintain, all aerial closures are re-enterable without the need for any re-entry kits, special tools or sealants
* Designed and tested to Telcordia™ GR-771 aerial weathertight closure requirements
* Rural Utilities Service (RUS) listed

NEMA RATED Outdoor FIBER OPTIC ENCLOSURES We can supply you with a full line of standard and special NEMA rated enclosures and components well suited for Homeland Security Product support. Our own complete fiber-optics product offering can be leveraged in certain cases to minimize lead-time and provide value added solutions in a short time period

West Coast (866) 342-3721-------East Coast (866) 650-DATA

Click on Either Link For Your Needs

-------------------------------------------------

Rack Mount Enclosures--------------------------------------------Wall Mount Fiber Enclosures

Outdoor FTTH-Fiber Pedestals & Enclosures

Outdoor-Fiber Pedestals & Enclosures

Pedlock BDO Series Pedestals are a key element of any FTTP solution. In both greenfield and brownfield fiber deployments, BDO Pedestals provide easy access to branch and drop splice while protecting and storing loose buffer tube fiber optic cables. The exclusive BDO bracket allows technicians to mount splice trays and splitters securely with ample access to perform in-field splicing.
BDO Pedestals feature a non-metallic construction that offers super OSP protection against floods, fire, dirt, insects and impact. An expanded-capacity split base is designed to easily install around conduit-fed cable bundles in new construction (excludes 14” diameter pedestals). BDO pedestals are an ideal solution for rehabilitation of metallic enclosures, and protection of co-located copper/fiber distribution points. The CMPH is a versatile OSP closure designed for both new provisioning installations as well as rehabilitation of existing access points housed in metallic enclosures. The CMPH’s superior structural strength, outstanding environmental protection and ease of installation combine to create a long-life housing that reduces operational expenses.

A two-piece assembly features a lift-off dome and a corrugated channel base. The lift-off dome allows 360º access to internal working areas and includes self-latching locks with secondary bolt locks on both left and right side panels. The dome provides “bell jar” flood protection, eliminates intrusion of wind-blown rain and dust, and prevents unauthorized entry. The base provides ample room for entry of multiple large cables, including conduit. A spacious bottom entry allows technicians to easily slide the base over existing large cable rehabilitation applications.Internally, the CMPH features a sturdy metal bracket with craft-friendly repositionable splice bars, a cable splice support rail, and a 6-point bonding/grounding bar. The spacious internal working area accommodates copper splices of 1,800 to 3,600 pairs or passive fiber optic equipment (interconnect and splitter). The CMPH is an exceptional protection solution for copper/fiber co-locations.

 

Main Distribution Frames- Network Bays-Open Bay Systems

Additional Fiber Optic Enclosures

 

or visit this link for sample pricing Click Here For Fiber Optic Assembly Pricing

home | cables | switches | Contact Us our team | locations