cable, vdsl, patch
|
Wholesale CAT 6 Cable- CAT 6 Cable Wholesale Cable- Plenum CAT 6 Cable- PVC CAT6 Cable-Enhanced CAT 6 Cable- Category 5e Cable- Category 6 Cable- 4 Pair Plenum Cable- CAT 6 Cable- Outdoor Rated CAT 5e Cable- Smart Home Cable- Media Twist Cable- 350 MHZ UTP Cable American Data Supply offers a wide variety of wholesale cat 6 cable including CAT 6 cable UTP twisted pair cables ranging from CAT 6 Plenum cable, CAT 6 Cable from Commscope's 5504M, Belden's Media Twist and Helix Hi Temps's equivalent's CAT 6 enhanced cables.We also have a full range of PVC CAT 6 rated cables, CAT 5e, outdoor rated CAT 5e cable, CAT 6, and CAT 6 Plenum enhanced, Smart Cable, and indoor/outdoor rated cable to suit your needs from several manufacturers. CommScope's CAT 6 cable offers unshielded twisted pair cable technology that is designed to serve the high speed local area network marketplace. CommScope's Network products are among the highest performing twisted pair products on the market. We have great pricing on Category 6 Enhanced -CAT 6 Cable equivalent to the Belden 7852A Cable for about 40% less. Please call us today at (866) 650-DATA.
Category 6 (CAT 6) technology is rapidly growing in the telecommunications industry’s commercial market. CAT 6 has been under development since late 1997. Originally, the wiring was intended to go from the 100 MHz capability of CAT 5 to 200 MHz, but later that was revised to 250 MHz. CAT 6 provides for other metrics as well, variables that become important at high bandwidth rates. These include crosstalk, or interference between wire pairs, and skew, the difference in timing of signals on the wires.
CAT 6 is the latest type of four pair twisted copper cable designed for high speed data transmission. CAT 5 was initially touted as the last cable you'll ever need, but then came Gigabit Ethernet, which pushed the technology to its limits and used all four pairs of wires in the cable. So, manufacturers started making, "enhanced", versions of the cable (hence the "E”). Bandwidth precedes data rates just as highways come before traffic. Doubling the bandwidth is like adding twice the number of lanes on a highway. The trends of the past and the predictions for the future indicate that data rates have been doubling every 18 months. Current applications running at 1 Gb/s are really pushing the limits of Category 5E cabling. As streaming media applications such as video and multi-media become increasingly commonplace, the demands for faster data rates will increase and spawn new applications that will benefit from the higher bandwidth offered by Category 6. This is exactly what happened in the early ’90s when the higher bandwidth of Category 5 cabling compared to Category 3 caused most local area network (LAN) applications to choose the better media to allow simpler, cost effective, higher speed LAN applications, such as 100BASE-TX. It is also important to note that cabling infrastructure is generally considered a 10 year investment as opposed to one or three years for electronics or software. There are several decisions to consider when specifying and designing a Category 6 (CAT 6) structured wiring system. In the end, the most important decision for every contractor and installer is that they must install a reliable system that achieves CAT 6 performance. CAT 6 component-rated structured wiring products are the best choice for a CAT 6 system.
To achieve a component-rated CAT 6 system, every component of the system must be component compliant and backwards compatible. (see Figure 1) The modular connectors, patch panels, patch cords, and cable must be tested individually, and each must show their own test results to ensure that the system will meet TIA/EIA 568-B.2-1 CAT 6 standards. In addition, TIA specifies that each of the CAT 6 components must be backwards compatible. In order to achieve backwards compatibility, each component must be component compliant and will be able to work with lower category rated components. What this means is that mating a Category 6 patch panel with a Category 5e patch cord will result in Category 5e performance. And this means that mating a Category 6 patch panel with a Category 3 patch cord will result in Category 3 performance. The benefit for backwards compatibility allows the contractor and installer greater flexibility with an open architecture system, so they can easily change any component without the cost of changing the entire system. Another key benefit of backwards compatibility is vendor independence. Using different brands of CAT 6 products in one system gives contractors and installers greater flexibility when specifying and purchasing CAT 6 products. CAT 6 components being manufactured today must meet the requirements established by the Telecommunications Industry Association (TIA)–not only for CAT 6 performance compliance, but also for interoperability between different vendors’ products. A tuned system does have advantages and is proven to produce superior results. If my installation is designed for CAT 6 link compliance, am I okay? Without a component compliant solution, the answer is no. Remember that CAT 6 link does not see the cross-connect, patch cords, and equipment cords. Patch cords are thought by many to be a primary weak link in any CAT 6 system. Once you add in patch cords, equipment cords and the cross-connect, your system may not achieve CAT 6 performance. If my installation is designed for CAT 6 channel compliance, am I okay? Without a component compliant solution, the answer is yes, but if you change any of the components, modular connectors, patch panels, patch cords, or use a different brand of CAT 6 cable then your system may not achieve CAT 6 performance.
Are there any CAT 6 systems that are CAT 6 link, channel, and component compliant? Companies such as ICC offer, a component compliant CAT 6 system that meets today's demands for increased bandwidth and performance which exceeds requirements of ANSI/TIA/EIA-568-B.2-1. In addition, a family of tuned and performance matched connectors, patch panels, patch cords, and cable is essential if you want to deliver superior performance, quality and value for the complete CAT 6 end-to-end solution. The CAT 6 channel test configuration is to be used by system designers and users of data communication systems to verfy the performance of the overall CAT 6 channel. The CAT 6 channel includes up to 90m (295 ft.) of CAT 6 horizontal cable, a CAT 6 patch cord, a CAT 6 telecommunications room. The total length of CAT 6 patch cords in the work area shall not exceed 10m (33 ft.). The connections to the equipment at each end of the channel are not included in the channel definition. The channel definition does not apply to those cases where the horizontal cabling is cross-connected to the backbone cabling. (see Figure 1). Brief OverviewOn June 20, 2002 TIA published the category 6 addition to the TIA-568 standard, which has the official document number of ANSI/TIA/EIA-568-B.2-1. A Consortium was formed to promote the adoption of category 6. This Category 6 Consortium has assisted in development of generic standards primarily for balanced twisted-pair cabling systems. To begin this initiative, the Category 6 Consortium released the following white paper and FAQs to provide industry participants with an update on category 6 cabling and applications standards, as well as additional references for finding category 6 information and products. It is important to note that any opinions expressed in this document are those of the participants of the Category 6 Consortium and are not necessarily those of the entire TIA membership. New Announcements"Category 6 Cabling: IEEE 802.3 Forms Study Group for 10G Over UTP", January 2003 White Papers"Category 6 Cabling: Static Discharge Between LAN Cabling and Data Terminal Equipment", January 2003 (registration required on following page) "Category 6 Cabling: A Standards and Systems Overview", August 2002 (registration required on following page) Buy it OnlineBuy and download the Category 6 standard from Global Engineering Documents. Frequently Asked Questions About the Category 6 StandardNote: These FAQs were developed by the Category 6 Consortium. The Category 6 Consortium is an emerging working group whose mission is to create market and industry awareness - as well as demand - for cabling systems and components based on TIA's new category 6 cabling standard. To learn more about the Category 6 Consortium and to participate, please contact TIA at (703) 907-7472 or email gemd@tia.eia.org. Show only questions | Show answers below questions
Our Plenum Innerduct 763108 CAT 5e Outoor Cable: ListPrice: $ 310/1000 feet, Our Price $ 189.99/1000 Feet- Discount Available!!Call (866) 342-3721 Our Plenum Innerduct 763108 CAT 5e Outoor Cable-1000' Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable is not the same as you can buy at 'retails stores that is rated as "indoor-outdoor'- this is the real mccoy and can be direct buried into the ground. Order Part Number:
SPECIFICATIONS
Call
Today For Up To Date Pricing (866) 342-3721 Our outdoor rated CAT 5e cable is available in 500 foot- 1000 foot reels as well as custom lengths- since the outdoor rated CAT 5e cable is based on the cost of oil-you need to call us at (866) 342-3721 to get the latest pricing. Generally the outdoor rated CAT 5e Cable costs from$ 150-$ 195 per 1000 foot reel. With custom lengths of the utdor rated CAT 5e cable there is also a cut charge. We can normally ship the same day of order is placed before 1pm Pacific Time. Plenum Innerduct Carries thousands of types of cables from the below manufacturers for CAT 5e cable, CAT 5e Plenum, CAT 6 plenum, CAT 6 cable and Outdoor Rated CAT 5e Cable CAT6 Bulk Cable- Available in Plenum and PVC
We Carry CAT 5e, CAT 5E and CAT 6 Bulk Cable From The Below Manufacturers
American Data Supply also offers wholesale priced CAT 5e Cable via "pallet purchasing" in 1000 foot reels for less than $40.00 per box. Plenum CAT 5e plenum at pallet pricing is from $ 70-$85.00 per 1000 foot reel.Please call for details at (866) 650-DATA.
Dielectric
Cables Outdoor OSP Cables
UltraPipe Category 6e+ cables exceed all proposed Category 6 specifications and provides superior bandwidth performance up to 550Mhz to support broadband video and high-speed full-duplex transmission protocols. It defines a new level of performance with a 300% improvement in PowerSum Crosstalk and a 60% improvement in return loss over Category 6. UltraPipe's patented design includes the revolutionary Isolator pair separator, which resolves NEXT and ELFEXT issues required for accurate transmission using all four pairs.
Engineered specifically for high-speed, full-duplex, parallel transmission protocols that dominate new technologies, UltraMedia's patented design, which includes the revolutionary Isolator pair separator, resolves ELFEXT and balance issues required for accurate transmission using all four pairs. Specified to 400Mhz, UltraMedia provides the performance margin against Category 6 requirements necessary for bandwidth intensive applications such as 3D imaging and Gigabit Ethernet.
The
Commscope Media 6 meets all Category 6 specification to support
broadband video and high speed, full-duplex transmission protocols
that new technologies demand. Features include a flexible jacket,
thousand to zero footage markers, vibrant colored pairs with a
co-extruded color stripe for easy identification, and a smaller
OD than typical Category 6 products
Recently, CommScope introduced their expanded Residential Cabling line. The Residential Cabling catalog contains 20 new coaxial, fiber, and UTP cables for residential voice, data, and video applications in single, Siamese, and bundled designs. CommScope's UltraHome® residential cabling products provide the foundation to support the capabilities of today's technology as well as those of the future.
DRAKA- Helix -Hi Temp Products Category
6 UTP (SuperCAT1000) plenum (805508), non-plenum (705508)
and patch cables (705708) with 200 MHz bandwidth that deliver
2.4 GHz performance
This all weather SuperCAT cable is an outdoor rated CAT 5e cable that can be installed directly in the ground, inside a duct or aerially lashed to a support member. The cable is fully flooded and has a tough UV and abrasion resistant black polyethlene jacket. The cable is designed to withstand temperatures as low as -70degrees C (Celsius) and as high as 75 degress C. Data transmission rates are up to 100Ms/second. This cable is the ideal solution for connecting LAN terminal locations outside the main building such as portable classrooms without the need to use expensive optical fiber systems.Optional aluminum or steel shielding systems provide addtional protection for EMI and damage caused by rodents. Order Part Number: Plenum Innerduct 763108 CAT 5e Outoor Cable (Custom Lengths Available!) Plenum Innerduct 763208 Aluminum Shielded Cable (Call For Minimum Order) Plenum Innerduct 763308 Steel Shielded Cable (Call For Minimum Order)
Call Us For a Custom Quote Today For All Your Cable Needs (866) 342-3721 or 650-DATA |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
We have CAT 6 Inserts as Low as $ 1.95 in quantities over 1000 pcs- Daily Specials as low as $ 2.49 each- Call Today (866-650-DATA
(866)
650-3282
UltraPipe
6ECMP 4 pair non 3x1 
7504
4 pair plenum 
6NF4 4 pair
outdoor 
55N4R 4 pair
non-plenum 
5524M 8 pair
plenum 3x1 
5N54 8 pair
non-plenum 
Home | Cables | Switches | Contact Us | Our Team | Locations |
