MRV Products
The Fiber Driver™ family includes three types of switch
modules: three-, four-, and six-port Ethernet/Fast Ethernet switches. Switch
modules are used to link between 10Mbps and 100Mbps or Half to Full Duplex mode.
Switch modules offer a combination of 10/100Base-TX ports and 100Base-FX ports.
They separate between Ethernet collision domains and filter local traffic from
propagating to the rest of the network.
Switch modules receive power
directly from the chassis. They are hot-swappable and SNMP configurable when
installed in a managed Fiber Driver chassis with the Fiber Driver management
module. They can be configured via Fiber Driver's MegaVision Web™ comprehensive
NMS or by any SNMP MIB browser. Switch modules support basic port configuration
such as speed and Duplex Mode, but do not support Spanning Tree or VLAN
configuration.
All switch modules support aging and can forward extended
size frames, including jumbo frames up to 6k and the 802.1Q VLAN packet format
of 1536. |
 |
MRV
|
