Plenum Innerduct is a national rack supplier and can offer a wide selections of 4 post racks. Plenum Innerduct is a data cabinet distributor and carries a complete line of data cabinets, data enclosures, open bay racks, relay racks, LAN racks, enclosures, fiber optic enclosures, Zone 4 Racks, zone 4 data cabinets and seismic cabinets for data centers, communication closets, and communications centers. We also have Zone 4 data cabinets and zone 4 realay racks for earthquake enclosures preparedness and national security. The zone 4 seismic data cabinets are a new line of proven technology from Xmark designed specifically for Zone 4 earthquake requirements. We carry zone 4 racks manufactured by ESW (formerly Encore), Quest, Hoffman, Great Lakes,Synergy, Xmark and others for Zone 4 data cabinet earthquake applications and zone 4 enclosure environments. These zone 4 racks or zone 4 enclosures are built out of 10 gauge steel and this steel welded Channel rack has been designed for the Bell System and has been tested and approved to Pacific Bell Static Seismic Test PBS-000-102PT.
Seismic Cabinets.etc.

 

Four Post Racks   Part No. Description   4P1224-24 24″D Rack with #12-24 mounting; aluminum upright construction and steel bracket set (includes mounting hardware); 3 cartons totaling 64 lbs.   4P1224-29 Same as above except with 29″D; 3 cartons totaling 65 lbs.   4P1224-32 Same as above except with 32″D; 3 cartons totaling 68 lbs.   4P1224-36 Same as above except with 36″D; 3 cartons totaling 69 lbs.   4PM6-24 24″D Rack with M6 mounting; cold rolled steel construction (includes mounting hardware); 3 cartons totaling 82 lbs.   4PM6-29 Same as above except with 29″D; 3 cartons totaling 63 lbs.   4PM6-32 Same as above except with 32″D; 3 cartons totaling 86 lbs.   4PM6-36 Same as above except with 36″D; 3 cartons totaling 87 lbs.

 

 

 

 

 

 

 

4 Post Racks-Info - 4 Post Racks- Info

	Miracel 19" Lab Rack NO 19
	■ with fixed 19" built-in unit on the front ■ for built-in units in accordance with IEC 297 3 ■ flexible assembly of the built-in units using T slots For the installation of ■ 19" components on the front ■ equipment with maximum width of 450 mm ■ installation accessories Jumpering compartment ■ front 123 mm Load rating ■ 5000 N static Tests ■ earthing according to VDE 0100 part 540 ■ vibration test according to MIL-STD 810 E Material / Finish ■ basic rack, extruded aluminium, polished ■ corner piece die-cast aluminium ■ multifunctional frames and 19" angular extrusions sheet steel, zinc-plated Supply schedule 1 basic unit 2 19" aluminium vertical extrusions with T slot and increment slide for spring nut M5 2 multifunctional frames for cable clamping and universal assembly options 4 levelling feet (0-25 mm) How supplied ■ assembled Please note For the installation of chassis runners and 19" shelves, additional 19"- are required at the rear. Rack Suites To create a rack suite, per connection you require a set of suite connectors BN 1.130.935.7
	Miracel NO19 (Width 600mm) with T-slot profile Order Number nominal depth chassis depth installation height installation height nominal height weight   T [mm] t [mm] h [U] h [mm] H [mm] [kg]   600 435 23 1052 1200 14 01.135.793.3 37 1652 1800 16 01.135.795.3 41 1852 2000 17 01.135.796.3 46 2052 2200 18 01.135.797.3 700 435 23 1052 1200 15 01.135.799.3 37 1652 1800 17 01.135.801.3 41 1852 2000 18 01.135.802.3           800 635 23 1052 1200 16 01.135.817.3 37 1652 1800 18 01.135.819.3 41 1852 2000 19 01.135.820.3 46 2052 2200 20 01.135.821.3 900 735 37 1652 1800 19 01.135.842.0 41 1852 2000 20 01.135.843.0 46 2052 2200 21 01.135.844.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cable Management Racks- Distribution Racks Below

B-Line Seismic Rack - Call For Pricing (866) 342-3721

• Independent testing conducted in accordance with ICBO AC156 standard for use up to 900 lbs. (408kg).
• Conformance to EIA-310-D
• Mounting rail spacing is adjustable from 3" (76mm) to 8" (203mm).
• 45 rack mounting units.
• Mounting rails are zinc plated for grounding conductivity.
• Open top, bottom, and sides permit unlimited cable management options.
• Industry standard mounting holes on sides allow attachment of vertical cable managers.
• Top rack recess allows for installation of a 6" (150mm) wire basket tray or cable runway.
• Openings in front and rear of base for duplex receptacle mounting.
• Holes for grounding provided in four locations.
• Tubular steel frame provides a high degree of strength to rack ratio.
• US and foreign patents pending.
• 84" (2133mm) height
• Standard finishes: Flat Black Powder Coat (FB), Telco Gray (TG) or Computer White (CW)

• * Standard finishes: Flat Black Powder Coat (FB), Telco Gray (TG) or Computer White (CW)

  See product sheet for additional complete details. Specifications

Relay Rack Part Numbering
SB-852-19-084 FB
Series	Rack Width	Height	Finish*
SB-852	19=19" EIA	084=84" (2133mm)	FB
	23=23" EIA		TG

Catalogues Section A: Auxiliary Framing & Accessories (1.29 MB). Section B: Cable Rack & Accessories (1.73 MB). Section C: Hardware (1.2 MB). Section D: Equipment Racks (3.6 MB). Section E: Distribution Frames (1.47 MB). Section F: Cabinets (1.21 MB). Section G: Fiber Cable Management System (1.34 MB). Section H: Seismic Products (3.44 MB). Section I: Enterprise Network Solutions (1.42 MB). Section J: Qwest Line Card (390 KB). Section K: SBC Approved Bays & Accessories (1 MB).

Newton Relay Rack- Newton Economy Rack Adjustable Equipment Rack: 19" or 23" Relay Rack Available in 3', 4', 5' and 6' heights Conforms to EIA Standards Uprights are of 3" Channel formed from 11GA (120) Steel Finsh: Telco Grey - Standard Finish            Zinc Plated and Gold Chromate            Black Available Available Accessories Include: Mounting Hardware Wall Mounting Hardware Gated Rack Hardware Casters and Support Hardware

Seismic Rack Newton Symmetric Equipment Rack Get cabinet load capacity for an equipment rack price Sturdy 11 gauge (HSLA: High strength, low alloy) frame. Our revolutionary seismic equipment rack is Zone 4, Level 3 certified to hold a massive 875 lbs. Newton Tubular Cable Rack.... Designed to "standard" data center dimensions, 119 1/2" long Lighter weight, saves on freight !!! Tubular design, easier to handle and install than heavier, solid side

   Racks and Accessories

Distribution Racks
CableTies

Raceway Systems
Vertical Rings
Rack Mount Rear Cable Management Bar
Metal Ring Panels
Metal Interbay Panels
Extended Cable Management Bracket
Clip Panels
Cable Management Ring Panels
Cable Management Panel Covers
Cable Management Interbay Panels
Cable Management Finger Duct Panels
Blank Panels

Cable Management Racks

Cable Management Racks combine the features of a high quality relay rack, as well as effective cable routing and raceway facilities, all in one complete unit. All aluminum cable management rack allows for the mounting of a wide variety of 19 inch wide patch panels, hubs, switches, and related rack mount equipment. The rack is supplied with cable hangers, cable ties and generous provisions for organizing incoming cables for termination with effective patch cord management on the front. Racks are shipped with all assembly required plus an accessory pack that includes 20 cable ties, 16 cable hangers, 40 cuphead mounting screws, and grommeting for cable routing cutouts.

Standard equipments racks are designed for 19 inch rack mount equipment. Racks are constructed of aluminum and are available in a variety of standard heights. Each rack is drilled and tapped on both the front and the rear rails with 10-32 holes on EIA spacing. Standard rack finish is black. Racks are packaged knocked down for easy shipment.

Part Number	Cable Management Rack Description
1977-1032B	Signamax Cable Management Rack, 19"W x 84"H, Black Finish, 10-32 Holes

Cable Management Racks

Part Number	Cable Management Rack Description
RR-84B	Signamax Equipment Rack, 19"W x 84"H, Black Finish, 10-32 Holes
RR-48B	Signamax Equipment Rack, 19"W x 48"H, Black Finish, 10-32 Holes
RR-84	Signamax Equipment Rack, 19"W x 84"H, Milled Finish, 10-32 Holes
RR-48	Signamax Equipment Rack, 19"W x 48"H, Milled Finish, 10-32 Holes

B-Line Telco Rack

Features:

Technical Information:

 

Knurr Miracel 19" Distribution Rack – Network Rack NS 25

Miracel NS25 (Width 800mm)							Order Number
type	nominal depth	chassis depth	installation height		nominal height	weight
	T [mm]	t [mm]	h [U]	h [mm]	H [mm]	[kg]
with side panels	600	365	41	1852	2120	112	01.136.044.1
			41	1852	2120	112	01.136.044.8
	800	565	41	1852	2120	120	01.136.050.1
			41	1852	2120	120	01.136.050.8
			46	2052	2320	130	01.136.051.1
			46	2052	2320	130	01.136.051.8
	900	665	41	1852	2120	124	01.136.056.1
			41	1852	2120	124	01.136.056.8
			46	2052	2320	134	01.136.057.1
			46	2052	2320	134	01.136.057.8
	1000	740	41	1852	2120	140	01.127.970.1
			41	1852	2120	140	01.127.970.8
without side panels	600	365	41	1852	2120	103	01.136.244.1
	800	565	41	1852	2120	109	01.136.250.1
			41	1852	2120	109	01.136.250.8
	900	665	41	1852	2120	118	01.136.256.1
			41	1852	2120	118	01.136.256.8
	1000	740	41	1852	2120	128	01.127.975.1
			41	1852	2120	128	01.127.975.8

 

	Miracel 19" Distribution Rack – Network Rack NS 25
	■ installation of chassis runners and 19" shelves possible ■ with fixed 19" built-in unit on the front and rear ■ for built-in units in accordance with IEC 297 3 ■ flexible assembly of the built-in units using T slots ■ cable entry via plinth and cover ■ heat loss discharge via ventilation dome ■ door opening angle 180° Variants Type 1 ■ single rack (with side panels) Type 2 ■ rack for rack suite (without side panels) For the installation of ■ 19" components on the front and rear ■ equipment with maximum width of 450 mm ■ installation accessories Jumpering compartment ■ front 123 mm Load rating ■ 5000 N static Degree of protection IP 40 (upgradeble to IP 55) Tests ■ earthing according to VDE 0100 P 540 ■ vibration test according to MIL-STD 810 E ■ IP test according to DIN 40 050 / IEC 529 Material / Finish ■ basis rack, extruded aluminium, polished ■ corner pieces, die-cast aluminium, polished ■ cover zinc-plated sheet steel, powder-coated textured ■ doors, sheet steel, ,powder-coated structure, glass infill front door, single security-glass panel, 4 mm ■ multifunctional members an 19"-extrusions sheet steel, zinc-plated Colour Final digit of order number .1: ■ Door trim RAL 9011 black ■ Visible surface of the cover RAL 7035 light grey Final digit of order number .8: ■ Door trim RAL 9011 black ■ Visible surface of the cover RAL 70321 black grey Supply schedule type 1 1 basic unit 4 19" aluminium vertical extrusions with T slot and increment slide for spring nut M5 2 multifunctional frame for cable clamping and universal assembly options 1 cover with ventilation dome and integrated cable entry 1 front door, single-winged, single security glass panel, with handle and fixing for locking cylinders 1 rear doors, sheet steel, with handle and fixing for locking cylinders 2 side panels with quick locking 1 plinth for cable entry on the side and rear with levelling feet (0-25 mm) 2 lateral plinth trim, closed 2 plinth trims for front and rear, with airing vents and fixing for filter mat 1 complete earthing test (VDE 0100) type 2 1 basic unit 4 19" aluminium vertical extrusions with T slot and increment slide for spring nut M5 2 multifunctional frame for cable clamping and universal assembly options 1 cover with ventilation dome and integrated cable entry 1 front door, single-winged, single security glass panel, with handle and fixing for locking cylinders 1 rear doors, sheet steel, with handle and fixing for locking cylinders 1 plinth for cable entry on the side and rear with levelling feet (0-25 mm) 2 plinth trims for front and rear, with airing vents and fixing for filter mat 1 complete earthing test (VDE 0100) How supplied ■ assembled Please note Rack suites To create a rack series with the rack number n, you require: (n-1) racks without side panels 1 rack with side panels In a rack suite, per connection you require a set of suite connectors BN 01.130.935.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We now have all types of data cabinets & racks for DATA CENTERS and DATA CABINETS

 

Plenum Innerduct offers Newton Data Cabinets, Hoffman Data cabinets, Quest Data Cabinets, ESW Data Cabinets, Cooper Data Cabinets, B-Line Data Cabinets, Quest Data Cabinets, and cabinets from other manufacturers by request.

Quality World Class Data Cabinets, Data Enclosures and Racks From Knurr

Command Centers	Data Cabinets-19" Server Racks- 19" Network Racks	Data Cabinets- 4 Post Frame- 4 Post Rack-19" 4 Post Rack	Data Cabinet 19" Server Racks With Mesh Door	Data Cabinet 19" Server Rack	Data Cabinets 19" Server Racks- 19" Network Racks
Water Cooled Cabinets- Water Cooled Server Racks	Flexible rack fixing with height adjustable wall mounting	Data Cabinets-Seismic Racks- Seismic Cabinets- Zone 4 Data Cabinets	Cable Management Racks	19" Small Racks	Outdoor Cabinets

LAN Rack Accessories- Keyboard trays-Shelves KVM Switches

We carry cable management racks, Wallmount Rack and wallmount rack solutions for applications ranging from data centers, server rooms, to all office envrironments. Not only will Plenum Innerduct will meet or beat all US based pricing- but will assist you in designing your network at NO EXTRA CHARGE. Call us for details at (866) 342-3721.

Wall Mount Racks and LAN Stations from ICC,Signamax, Hoffman,Ortronics,Kendall Howard and more.

 

 

 

 

 

 

 

 

 

 

 

 

Rack Mount Shelves- Rack Mount Enclosures

Rack Mount Shelves Fiber Optic Rack Mount Enclosures

Standard equipments racks are designed for 19 inch rack mount equipment. Racks are constructed of aluminum and are available in a variety of standard heights. Each rack is drilled and tapped on both the front and the rear rails with 10-32 holes on EIA spacing. Standard rack finish is black. Racks are packaged knocked down for easy shipment.

Additional Data Cabinets- Data Racks- Data Enclosures - Wall Mount Enclosures-Seismic Racks

Cable Management Racks

Cable Management Racks combine the features of a high quality relay rack, as well as effective cable routing and raceway facilities, all in one complete unit. All aluminum cable management rack allows for the mounting of a wide variety of 19 inch wide patch panels, hubs, switches, and related rack mount equipment. The rack is supplied with cable hangers, cable ties and generous provisions for organizing incoming cables for termination with effective patch cord management on the front. Racks are shipped with all assembly required plus an accessory pack that includes 20 cable ties, 16 cable hangers, 40 cuphead mounting screws, and grommeting for cable routing cutouts.

Standard equipments racks are designed for 19 inch rack mount equipment. Racks are constructed of aluminum and are available in a variety of standard heights. Each rack is drilled and tapped on both the front and the rear rails with 10-32 holes on EIA spacing. Standard rack finish is black. Racks are packaged knocked down for easy shipment.

Cable Management Racks

41U 1930 Series Rack- Data Cabinet- -Part Number ATS41U1930
This rack is a great all around entry level racking system. Its simple design offers just about everything you need in a rack from ventilation and cooling to fully adjustable rails and removable side panels.

Features:
Standard EIA 19" Rack with cage nut style rails
Aluminum front and rear doors frames
Steel removable side doors, vertical rails, top and bottom covers
Front door with acrylate
Rear door with free air cooling
Both front and rear doors equipped with key lock for security
Removable and adjustable vertical rails
Ground screws
Lockable wheels
2 x 12cm low noise AC fan on top cover
1 x 6 outlet 110V AC power strip

Package information:
Ships LTL or common carrier
Dimensions: W.24.8� x H. 74.88� x D. 35.43�
Net Weight: 198Lbs
Shipping Weight: 220Lbs
MEAS: 39 cuftw

41U 1931 Series Rack
This rack is the best of the best in racking cabinets. Its frame is made from extruded 6063 Aluminum for maximum strength and durability. Each of these racks ships complete with all accessories included and installed complete. Our 41U rack is also EIA compliant and has a 10 year limited warranty on parts.

Features:
30" Rail to rail usable depth
Front and rear fully adjustable cage nut style rails (4 total)
Lift off side panels for easy access.
Semi-vented locking front door with integrated glass
Fully perforated locking rear door
Bottom panels remove for cabling
Dual ultra-quite topside fans remove ambient heat
6� power strips added for convenience.
4 heavy duty swiveling lockable casters
4 leveling feet
100 cage nuts
100 rack screws

Shipping options:
LTL � call for pricing
Door to Door available (they will deliver to your offices server room

XUS84-XL Ultra Server Exclusive Features

Zone 4 Data Cabinets- Zone 4 Racks

The Zone 4 Seismic Cabinet was extensively tested by an independent testing facility and passed with flying colors. It was subjected to static load test conditions and Zone 4 earthquake vibration test conditions in accordance with NEBS document TR-000063, Issue 4, 1992. There was no visible evidence of damage or deterioration to the cabinet as a result of the earthquake vibration test. The maximum displacement of the cabinet did not exceed the simple amplitude of 3 inches. More information as well as test results are available upon request.

Plenum Innerduct Carries a complete line of relay racks,ladder racks, data cabinets, raceway systems, distribution racks, cable management racks and enclosures for very application from the telephone closet to the network room to your co-location data center.We now have available Hendry rack systems and Newton racks for all you central office and data center needs. Call us today for a price quote at (866) 650-DATA. Plenum Innerduct , founded in 1992, has become a leading supplier of quality telecommunication equipment including computer cabinets, server racks, LAN work centers, printer stands, data cabinets, computer workstations, wire racks and KVM switches to IT centers. With offices located throughout the United States, we serve all regions of the United States and Canada. Plenum Innerduct specializes in providing quick solutions and quality products at discount prices that help organize and secure rackmount equipment.
.

We Now Carry Hendry & Newton Racks and Accesories

 

We have data cabinets (models ATS4232F ATS4240F ATS2740F ATS2732F) that can ship same day! Call us today at (866) 342-3721 for more info- or click on this link for more info on our same day data cabinet shipping. We carry data cabinets from several manufacturers that allow upis high on fine styling and value-for-money features. It has been designed and engineered specifically for easy assembly and rapid equipment integration at site.

Its innovative design is based on the use of aluminum profiles for the four vertical pillars, which are connected solidly to two welded steel end-frames. This results not only in low weight and an elegant appearance, but also permits quick assembly. Due to the rigidity provided by the steel end-frames, our data cabinet is able to handle equipment loads of up to 770 to 1500 lbs. This means it an ideal choice for mid-range use as a Server enclosure, or for network cabling purposes.

These zone 4 racks and zone 4 enclosures are designed for maximum protection for very application from the telephone closet to the network room to your co-location data center. Call us today for a price quote at (866) 650-DATA.

We Now Carry Hendry Zone 4 Racks & Zone 4 Enclosures

West Coast (866) 342-3721 East Coast (866) 650-DATA

We are Updating Our Website- Please Call Us Your Hendry Part Number and We WIll Provide You With An Immediate Quote

Zone 4 Racks

Zone 4 Data Cabinets

STANDARD FEATURES

* All racks are drilled and tapped to receive guard rails, cable rings and accessories.
* Holes are provided in sides for joining racks or mounting ladder end guards.
* All racks are equipped with top angle, base angle and bolts for assembly.
* Order guard rails and accessories as required.
* Different RMU options are available. See the Options and Ordering Information page.

* All racks are drilled and tapped to receive guard rails, cable rings and accessories.
* Holes are provided in sides for joining racks or mounting ladder end guards.
* All racks are equipped with top bars, base angles and bolts for assembly.
* Racks over 8'-0" should be ordered with a top angle. Order option D.
* Order guard rails and accessories as required.
* Different RMU options are available. See the Options and Ordering Information page.

	Cable Management Racks Newton Data Cabinets	Outdoor Data Cabinets
Wall Mounted 19" Racks picture swinggate rack here	Rack Accessories        Pictures & links to shelves, trays, ladder rack, cable management panels, and rack hardware DistributionRacks Relay Racks